双组份打胶机的优势是合理、实际操作简易等，与此同时因为单单为上胶所涉及所以占地空间小、运作成本费用相比的也是低的，特别适合中小型企业使用。那面对济南双组份打胶机胶头堵住的情况这么有效处理呢？

The advantages of two-component glue dispenser are reasonable price, simple operation, etc. At the same time, because of the small footprint and low operating costs involved in glue application alone, it is particularly suitable for small and medium-sized enterprises. What if the rubber head of Jinan two-component sealant dispenser is blocked?

由于打胶机由混胶仓到胶嘴容易堵，混胶仓是黑白胶交会对接的地方，当冲胶黑白分离时黑胶难免不残留，需然看是冲白了但是这个地方是冲不净的，这是一道堵，二是由混胶仓到胶嘴，由于要胶在管道走出，管道壁被胶粘得越来越小终堵了，这也是大量想买而不买的原因，有的客户买了用不了麻烦清洗。

As the glue dispenser is easy to block from the glue mixing bin to the rubber nozzle, the glue mixing bin is the place where black and white glue meets and connects. When the black and white glue is washed and separated, the black glue will inevitably remain. It is necessary to see that the white glue is washed, but this place cannot be cleaned. This is a block. The second is from the glue mixing bin to the rubber nozzle. As the glue is needed to go out of the pipe, the pipe wall is stuck smaller and smaller, and finally blocked. This is also the reason why a lot of people want to buy but do not buy, Some customers bought the car and didn't bother to clean it.

此外一些注意事项也要多加了解，如：

In addition, some precautions should be understood, such as:

1.点胶机不使用胶水时，需要把胶水拿下来保存才可以防止针头堵塞。例如AB胶，它的固化速度相对来说比较慢，不会那么快发生堵塞现象，但是如果长时间不操作，还是会发生堵塞现象的，所以这时候就需要把混合嘴取下，再把胶水保存好，以免堵塞整个出胶针口。

1. When the dispenser does not use glue, it is necessary to take the glue down and save it to prevent the needle from blocking. For example, the curing speed of AB glue is relatively slow, and it will not block up so quickly. However, if it is not operated for a long time, it will still block up. Therefore, it is necessary to remove the mixing nozzle at this time, and then store the glue to avoid blocking the entire rubber outlet.

2.持续点胶时间可以防止针头堵塞。像瞬干胶来加工点胶产品时，在常温下快干胶是快速固化的，如果在点胶过程中中断点胶的话，就很容易把针头堵塞，所以应该保持点胶的持续工作。

2. The continuous dispensing time can prevent the needle from blocking. For example, when instant drying glue is used to process dispensing products, the instant drying glue is fast curing at room temperature. If the dispensing is interrupted during dispensing, the needle will be easily blocked, so the dispensing should be continued.

3.提高温度可以防止针头堵塞。比如热熔胶使用全不锈钢点胶针头，胶水只要加热就能熔化，所以只要让加热器加热到一定温度，就不会发生针头堵塞现象。

3. Increasing the temperature can prevent the needle from blocking. For example, the hot melt adhesive uses an all stainless steel dispensing needle, and the glue can be melted as long as it is heated, so as long as the heater is heated to a certain temperature, the needle will not be blocked.

4.自动点胶机胶水选料。例如，使用胶水稠度底，不易固化，也不容易出现针头堵塞现象；粘度高，针头很快堵塞。

4. Glue selection of automatic dispenser. For example, when using glue with low consistency, it is not easy to solidify, and it is not easy to block the needle; The viscosity is high, and the needle is quickly blocked.

打胶机设计机构科学合理，就生产本身来说因为将中空玻璃的生产环节模式化可以每个生产环节都拥有独立的机器设备并且相互并不关联，即便其他机器设备出现问题也不会对双组份打胶机的上胶产生影响。您有需求就来我们网站http://www.jntiannuo.com留言咨询并联系吧！

The sealant dispenser design mechanism is scientific and reasonable. As far as production is concerned, each production link of insulating glass can have independent machines and equipment and are not related to each other. Even if other machines and equipment have problems, the sealant dispensing of two-component sealant dispenser will not be affected. Come to our website if you need http://www.jntiannuo.com Leave a message to consult and contact!