双组份打胶机在点胶过程有时候会出现断胶问题，一般是什么情况引起呢？小编在这里以常用硅胶为例子，做一次说明吧。

The two-component glue dispenser sometimes breaks glue during dispensing. What is the general reason? Xiao Bian takes common silica gel as an example here to make an explanation.

打胶机在点胶过程出现断胶，对于生产影响非常大的，不仅是质量没有保障，而且速度也是问题，从细节中解决断胶，让生产更加顺畅。气压供应不足导致打胶机压力不住，无法正常挤胶，所以才出现了现在断胶问题。

The glue breaking of the glue dispenser in the dispensing process has a great impact on the production, not only the quality is not guaranteed, but also the speed is a problem. Solve the glue breaking from the details to make the production more smooth. Inadequate air pressure supply causes that the pressure of the glue dispenser cannot be maintained and the glue cannot be extruded normally, so the problem of glue breaking now occurs.

一般我们情况，硅胶粘度性相对其它胶水来说，是相对高的，气压输出稳定性，是对于点胶设备的核心要求，所以为了能够满足到胶水连续输出，需要空压机有一定储气功能，保证连续工作的稳定性。

In general, the viscosity of silica gel is relatively high compared with other glues. The stability of air pressure output is the core requirement for dispensing equipment. Therefore, in order to meet the continuous output of glue, the air compressor needs to have a certain gas storage function to ensure the stability of continuous operation.

断胶使用配件不恰当导致，点胶针头与硅胶粘度不相当，由于浓度高，很容易堵胶，使用点胶针头尽量使用大些的针头，避免出现堵塞，而导致断胶。使用打胶机经常打样测试，再配置合适点胶配件，这样就不于断胶了。

The glue breaking is caused by improper use of accessories, and the viscosity of glue dispensing needle is not equal to that of silica gel. Due to the high concentration, it is easy to block the glue. Try to use a larger needle when using glue dispensing needle, so as to avoid blocking and causing glue breaking. Use the glue dispenser to make samples and test frequently, and then configure appropriate dispensing accessories, so that the glue will not break.

硅胶里面是否有空气，这也是影响到点胶效果的主要因素之一，空气是可以隔断胶水的，容易造成断续出胶，这样也是非常容易导致其出胶效果不连贯性，要排除相应问题，解决出胶难题，从而解决点胶上的效果。

Whether there is air in the silica gel is also one of the main factors affecting the dispensing effect. The air can cut off the glue, which is easy to cause intermittent dispensing, which is also very easy to lead to inconsistent dispensing effect. It is necessary to eliminate the corresponding problems, solve the dispensing problem, and thus solve the dispensing effect.

胶水凝固问题，硅胶通过会有表干现象，从而影响到出胶，表干出胶难度大，需要更大的气压才能够把胶水挤出，这也会导致前面胶水无法使用，需要放掉，避免出现质量问题。

Glue solidification problem. The silica gel will become dry when passing through, which will affect the glue release. It is difficult to release glue from the dry surface. It requires more air pressure to extrude the glue, which will also lead to the inability to use the glue in front, which needs to be discharged to avoid quality problems.

我们知道的打胶机断胶问题，往往是被其它因素影响到，而导致无法正常的工作，学习和了解胶水特性是非常重要的，在使用之前，请认真阅读胶水使用说明书，再配合打胶机进行点胶。更多相关事项就来我们网站http://www.jntiannuo.com咨询了解吧。

As we know, the glue breaking problem of the glue dispenser is often affected by other factors, which leads to the failure of normal operation. It is very important to learn and understand the glue characteristics. Before use, please read the glue operation manual carefully, and then cooperate with the glue dispenser to dispense glue. Come to our website for more information http://www.jntiannuo.com Ask and understand.