在现实使用中，打胶机的使用不可避免的存在着一些不正确的操作方法。这些不正确的操作方法有可能导致打胶机相关零件的损害，从而影响打胶机的打胶质量，更有甚者可能影响打胶机的使用寿命。那么下面双组份打胶机厂家就来讲讲正确的方法。

In the actual use, there are inevitably some incorrect operation methods in the use of the gluing machine. These incorrect operation methods may cause damage to relevant parts of the glue dispenser, thus affecting the glue dispensing quality of the glue dispenser, and even the service life of the glue dispenser. Then the manufacturer of the two-component gluing machine will talk about the correct method.

1、要记住的是，在打胶机的运行过程中，不要触碰一些正在运动的关键部位和带电的地方，防止发生危险。同时也要注意的是要让打胶机保持干净整洁，不要将无关的物件放在加工设备上，防止发生不必要的麻烦。

1. Keep in mind that during the operation of the glue applicator, do not touch some moving key parts and live places to prevent danger. At the same time, it is also important to keep the glue applicator clean and tidy. Do not put irrelevant objects on the processing equipment to prevent unnecessary troubles.

2、在打胶过程中注意打胶速度的调试，供胶机和打胶机的相互配合。也要注意人工操作和打胶机的配合。

2. During the gluing process, pay attention to the adjustment of the gluing speed and the mutual cooperation between the glue feeder and the gluing machine. Also pay attention to the cooperation between manual operation and gluing machine.

3、在开始工作时，确保打胶机能正常运行，打胶是否正常、速度是否匀称。如发现异常，应立即停机进行检查，否则可能会导致打胶机的损坏。

3. When starting the work, make sure that the gluing machine operates normally, whether the gluing is normal and whether the speed is symmetrical. If any abnormality is found, stop the machine immediately for inspection, otherwise the glue applicator may be damaged.

3、在使用打胶机的时候，很重要，另外及时的保养以及正确的使用可以使机器的寿命增加，提高产品质量以及提高产品的成产效率。

3. When using the gluing machine, safety is very important. In addition, timely maintenance and correct use can increase the service life of the machine, improve product quality and improve product production efficiency.

4、打胶工作结束的时候，要及时的清理胶管中剩余的双组份胶。一旦胶在胶管中固化，会影响隔天的工程进度。于怎么清洗？将旋转开关旋转到清洗状态和手动状态，按下排胶键，接下来再按排胶阀，这时会排出黑胶。打开黑胶减压阀进行排压，待压力降下之后拧紧阀门。排白胶操作过程同黑胶一样。

4. At the end of the gluing work, the remaining two-component glue in the hose shall be cleaned in time. Once the glue is cured in the hose, the next day's project progress will be affected. As for how to clean it? Turn the rotary switch to the cleaning state and the manual state, press the glue discharge key, and then press the glue discharge valve. At this time, the black glue will be discharged. Open the black glue pressure reducing valve for pressure relief, and tighten the valve after the pressure drops. The operation process of discharging white glue is the same as that of black glue.

5、注意打胶机上的小零件的使用，打胶机作为一套加工设备而言，质量还是非常有保证的。但是损坏率比较高的就是像小吸盘、定位滑轮这些小零件。所以在日常使用过程中，还是对这些小零件精心呵护些，毕竟真的用坏了，也会影响工程进度不是。

5. Pay attention to the use of small parts on the gluing machine. As a set of processing equipment, the quality of the gluing machine is very guaranteed. However, small parts such as small suction cups and positioning pulleys have a high damage rate. Therefore, in the process of daily use, it is better to take care of these small parts carefully. After all, if they are really worn out, they will also affect the progress of the project.

此外如果是刚刚购买没有多长时间的打胶机，在开始使用过程中会有一个磨合期。磨合期期间，使用打胶机要格外认真和小心。毕竟磨合期是决定后期打胶机好用与否的一个重要关键。关注我们http://www.jntiannuo.com，了解更多内容！

In addition, if you just bought a glue applicator that has not been used for a long time, there will be a running in period when you start using it. During the running in period, use the glue applicator with extra care. After all, the running in period is an important key to determine whether the glue applicator is easy to use in the later period. Follow us http://www.jntiannuo.com Yes, learn more!