随着市场竞争的日益激烈，一些厂家使用劣质丁基橡胶，其中含有很多杂质。如果长期使用，丁基胶点胶机的胶枪会被堵塞。那么我们应该怎么做?下面济南双组份打胶机厂家为您解说一番。

With the increasingly fierce market competition, some manufacturers use inferior butyl rubber, which contains many impurities. If used for a long time, the glue gun of the butyl glue dispenser will be blocked. So what should we do? The following is an explanation for you from the Jinan two-component gluing machine manufacturer.

丁基胶点胶机堵塞原因:

Reasons for blocking of butyl glue dispenser:

1.打胶过程中，停止时间较长，或多次堆积，打胶结束时无法完成清洗，尤其在夏季温度较高时。

1. During the gluing process, the center stops for a long time, or the center accumulates for many times, and the cleaning cannot be completed at the end of gluing, especially when the temperature is high in summer.

2.AB组分缺乏气压导致混合不均匀，凝胶化缓慢，颗粒简单

2. The lack of air pressure of AB component leads to uneven mixing, slow gel and simple particles

3.B组件没有进行过检查和清洗B组分对水蒸气敏感。由于运输和储存环境等偶然因素，B组件的表面可能会被剥皮，外壳的一部分被压入管道中，很容易产生颗粒。

3. Component B has not been inspected and cleaned. Component B is sensitive to water vapor. Due to accidental factors such as transportation and storage environment, the surface of component B may be peeled, and part of the shell is pressed into the pipe, which is easy to generate particles.

4.过滤器和单向止回阀长时间未清洗。

4. The filter and one-way check valve have not been cleaned for a long time.

5.压盘上的o形圈。B组件使用时间长，松动。

5. O-ring on pressure plate. Component B has been used for a long time and is loose.

丁基胶点胶机堵塞溶液:

Butyl glue dispenser blocking solution:

1.断开胶水需要多长时间呢？建议每天涂胶前根据断开时间前的温度和湿度测量剥皮时间。另外，目前的客户往往要求胶水的固化时间快，停止时间长，简单造成颗粒的出现。

1. How long does it take to disconnect the glue? It is recommended to measure the peeling time according to the temperature and humidity of the day before the disconnection time before gluing every day. In addition, current customers often require that the curing time of glue is fast and the stopping time is long, which simply causes the appearance of particles.

2.简单的解决办法是用刮刀在不影响胶水使用的情况下清洗外壳。

2. The simple solution is to clean the shell with a scraper without affecting the use of glue.

3.建议定期清洗过滤器、单向止回阀、静态混合器和胶枪。

3. It is recommended to clean the filter, one-way check valve, static mixer and glue gun regularly.

丁基胶打胶机阻塞的原因基本上就是以上所讲解内容，您可以作为参考使用，更多相关事项就来我们网站http://www.jntiannuo.com咨询了解吧。

The reason for the blocking of butyl rubber beater is basically the content explained above. You can use it as a reference. For more related matters, please visit our website http://www.jntiannuo.com Consult and understand.