双组份打胶机由A、B胶泵、气动系统、升降机构、机架等组成。现分别介绍如下：

The two-component glue applicator is composed of a and B glue pumps, pneumatic system, lifting mechanism and frame. The introduction is as follows:

1.胶泵：

1. Rubber pump:

（1）A、B组份各设一个胶泵，在各自的气马达驱动下，分别作往复运动，将胶吸入并压出。A、B胶泵分别与压胶盘固定在一起，再与机架连接组成各自的系统。

(1) Components a and B are each provided with a rubber pump, which reciprocates under the driving of their respective air motors to suck and press out the rubber. A. The glue pump B is fixed with the glue pressing plate, and then connected with the rack to form their own systems.

（2）A、B组份的配比是通过比例杠杆进行调节：向里调节，B出胶量减少，向外调节，B出胶量增加。通过调节比例杠杆来控制B胶的出胶量，从而控制A、B胶的配比。

(2) The proportioning of components a and B is adjusted by a proportional lever: adjust inward, the glue output of B decreases, and adjust outward, the glue output of B increases. Adjust the proportional lever to control the glue output of glue B, so as to control the proportion of glue a and B.

（3）出胶量：由气源处理器控制，逆时针调节，出胶量增加，顺时针调节出胶量减小。（这里指总出胶量）本胶泵通过比例杠杆调节A、B胶量配比，具有操作灵活，性能稳定，调节范围大等特点。

(3) Glue output: controlled by the air source processor, the glue output increases when it is adjusted counterclockwise, and decreases when it is adjusted clockwise. (here refers to the total glue output) the glue pump adjusts the proportion of glue a and B through the proportional lever, which has the characteristics of flexible operation, stable performance and large adjustment range.

2.升降机构：

2. Lifting mechanism:

A、B组份胶泵分别设一套气动升降机构，该升降机构分别由两个气缸并联组成，并通过横梁固定连接各自的泵体。其目的之一是将两缸的作用力通过压盘作用在胶面上，压力大小由调压阀调节，一般调整在0.3MPa左右；

A. The component B rubber pump is provided with a set of pneumatic lifting mechanism, which is composed of two cylinders in parallel and is fixedly connected to the pump body through the beam. One of its purposes is to act the force of the two cylinders on the rubber surface through the pressure plate. The pressure is adjusted by the pressure regulating valve, generally about 0.3MPa;

其二，当需要更换胶桶时，气缸可将压盘提起。离开胶桶，以便更变新的胶桶。

Second, when the rubber barrel needs to be replaced, the cylinder can lift the pressure plate. Leave the rubber bucket for a new one.

双组份打胶机的操作方法以其简单灵活的特点，迅速占领了适合用于灌胶的各个行业。您有需求或问题就来我们网站http://www.jntiannuo.com咨询吧。

The operation method of the two-component gluing machine is simple and flexible, and it has quickly occupied various industries suitable for gluing. If you have any needs or questions, please come to our website http://www.jntiannuo.com Consult.