The dispensing machine manufacturer fluid control, constantly improve the high glue skills, develop high-precision active dispensing equipment, help more customers efficient dispensing production, complete technical dispensing. Today, I would like to share with you some knowledge of the dispensing process, which is very useful for improving the dispensing process of the active dispensing machine.

　　改进有源点胶机点胶过程的两种方法:

　　There are two ways to improve the dispensing process of active dispenser:

　　1. 针与产品接触表面的距离

　　1. Distance between needle and product contact surface

　　配药机生产厂家认为，主动配药机的针与产品接口设置适当的距离，配药精度也受针与配药接口之间的距离影响，可以调整，提高配药机的配药精度。不同的点胶设备组合点胶工艺不同，点胶针也不同，有些针有一定的停止度，掌握点胶针与产品接触面之间的距离是非常重要的，点胶前应校准针的点胶距离。

　　According to the manufacturer of dispensing machine, the proper distance between the needle and the product interface of the active dispensing machine is set, and the dispensing accuracy is also affected by the distance between the needle and the dispensing interface, which can be adjusted to improve the dispensing accuracy of the dispensing machine. Different dispensing equipment combination dispensing process is different, dispensing needle is also different, some needles have a certain degree of stop, it is very important to master the distance between dispensing needle and product contact surface, the dispensing distance of needle should be calibrated before dispensing.

　　2. 选择合适的点药针，提高点药精度

　　2. Select appropriate dispensing needles to improve dispensing accuracy

　　根据产品的大小和点胶点的直径，可以选择主动点胶机的点胶针。一般来说，针的大小是胶点的一半就好了，如果胶点针过大而简单的溢胶，则会影响产品的点胶精度。

　　According to the size of the product and the diameter of the dispensing point, the dispensing needle of the active dispensing machine can be selected. Generally speaking, the size of the needle is half of the glue point. If the glue point needle is too large and simple, it will affect the dispensing accuracy of the product.

　　高速阀从德国的喷发火山喷发后的配料精度也可以完成阀、力,爆发瓣膜置换与视觉设备点胶阀使用胶水,喷发阀不触点胶水,胶水精度可以达到98%,更小的量2问,高频率每秒高达280赫兹,适用于各种液体,可以使用高粘度流体。

　　The high-speed valve can also complete the valve and force after the eruption of German eruption volcano. The explosive valve replacement and visual equipment dispensing valve use glue. The eruption valve does not contact glue. The glue accuracy can reach 98%. The minimum amount is 2 questions. The high frequency is up to 280 Hz per second. It is suitable for various liquids and can use high viscosity fluids.