口罩铝条热熔胶过胶机特点有哪些？
口罩铝条热熔胶过胶机特点是：
The characteristics of the hot melt adhesive machine for mask aluminum strip are as follows:
1：过胶迅速，可单面或双面同时过胶
1: Quick glue application, single side or double side glue application at the same time
2：可放置在桌面上，多人同时操作。
2: It can be placed on the desktop and operated by multiple people at the same time.
3：平面上胶，上胶均匀粘性好，滚胶的材质厚度范围广（可以通过调节上辊来调节）。
3: On the plane, the glue is evenly sticky, and the material thickness of the roll is wide (it can be adjusted by adjusting the upper roll).
4：机器畅销10余年机型成熟，经济耐用。
4: The machine has been selling well for more than 10 years, with mature model and durable economy.
5：宽度也可定制，现货规格有：300MM，400MM，500MM，600MM，800MM，1米，较大型如1米以上备货不多，要提前预定。欢迎联系我们:http://www.jntiannuo.com
5: Width can also be customized, spot specifications are: 300mm, 400mm, 500mm, 600mm, 800mm, 1M, larger if more than 1m stock is not much, to book in advance. Welcome to contact us: http://www.jntiannuo.com
(1) 粘接迅速 通常从涂胶到冷却粘牢,只需要几十秒,甚几秒的时间"
(1) It usually takes only tens of seconds, or even seconds, from gluing to cooling and sticking“
(2) 粘接范围广 对许多材料,甚对公认的难粘材料(如聚烯烃!蜡纸!复写纸等)也可以进行粘接。
(2) The bonding range is wide for many materials, even for the recognized difficult to stick materials (such as polyolefin, wax paper, carbon paper, etc.).
(3) 可反复加热,多次粘接"适合不同的尺寸，
(3) It can be repeatedly heated and bonded "suitable for different sizes,
(4) 性能稳定 便于贮存!运输"
(4) Stable performance, easy to store and transport“
(5) 生产成本更低廉
(5) Lower production cost
上胶特点：胶面在下
Features of gluing: the glue surface is under
上胶方式：整面上胶 ，加上辊
Gluing method: gluing the whole surface and adding the roller
上胶，宽面积：宽：600，可调，小宽度也可以随意上胶
Gluing, wide area: width: 600, adjustable, small width can also be glued at will
胶槽及滚轮均可独立控温。宽段变速方便大小材料使用
The rubber groove and roller can control the temperature independently. Wide range variable speed for convenient use of large and small materials
应用：主要应用于大面积材质的过胶，一般厚度在0.4—12mm以内均可。
Application: it is mainly used for over sizing of large area materials, and the thickness is generally within 0.4-12mm.
上一篇：改进主动点胶机点胶工艺的2个办法！
下一篇：自动点胶机为什么有三轴四轴五轴之分？
