The glue used in the gluing machine is mainly AB glue. AB type gels usually have epoxy resin, silicone resin and polyurethane. When the glue is black or dark grey, the inside will be filled with filler. Like epoxy resin, polyurethane gel is usually filled with gel. Silica gel, if it is the proportion of silica gel, fill rubber a and rubber B.

　　填充物由多种成分组成，如硅粉、石英砂、石灰粉等具有导热散热作用的填充物，增加硬度。但是这些填充物很硬而且会沉淀，那是一层和胶水。如果涂上一层，胶水的性质会发生变化，密度也会发生变化，导致比例发生变化，导致胶水不能使用，胶水背面固化，产品被冲走不合格。

　　The filler is composed of many components, such as silicon powder, quartz sand, lime powder and other fillers with heat conduction and heat dissipation, which increase the hardness. But these fillings are very hard and will settle. It's a layer and glue. If a layer is applied, the nature of the glue will change, the density will also change, resulting in a change in the proportion, resulting in the glue can not be used, the back of the glue is solidified, and the product is washed away unqualified.

　　如何防止胶水沉淀?

　　How to prevent the glue from settling?

　　1. 添加搅拌功能到桶。启动后，搅拌器将搅拌胶连续旋转，防止胶液沉降。此外，搅拌棒的功能更长。如果棍子太短，够不到底部，胶水就会沉淀下来。

　　1. Add the mixing function to the barrel. After startup, the agitator will continuously rotate the mixing glue to prevent the glue from settling. In addition, the function of the mixing rod is longer. If the stick is too short to reach the bottom, the glue will settle down.

　　2. 浇注前，请打开塑料桶，用搅拌棒或电钻搅拌。然后倒入桶中。

　　2. Before pouring, please open the plastic bucket and use the mixing rod or electric drill to mix. Then pour it into the bucket.

　　3.你可以买一些好的胶水。好的胶水。

　　3. You can buy some good glue. Good glue.

　　4. 购买接近生产日期的胶水。胶放的时间越长，沉淀越严重。

　　4. Purchase glue close to production date. The longer the glue is placed, the more serious the precipitation is.

　　胶水机更好天天运转，不要长时间使用。如果你长时间不使用它(例如，一周半)，把胶水从桶里拿出来，用酒精清洗。否则，胶水会在桶和管道中沉淀。

　　Glue machine had better run every day, do not use for a long time. If you don't use it for a long time (for example, a week and a half), take the glue out of the bucket and wash it with alcohol. Otherwise, the glue will settle in the barrel and pipe.

　　6. 为了防止沉淀，试管越短越好。管子太长，胶水容易在里面沉积。

　　6. In order to prevent precipitation, the shorter the tube, the better. The pipe is too long and the glue tends to deposit in it.

　　以上内容来自胶机小编，本文不代表本站观点。

　　The above content comes from the small edition of glue machine, this paper does not represent the viewpoint of this station.