为了科学正确的操作设备，防止错误的操作对人身和设备的损害，延长设备的使用寿命，下面就由双组份打胶机厂家分享一下打胶机的使用禁止事项。

In order to operate the equipment scientifically, correctly and safely, prevent the damage of wrong operation to personnel and equipment, and extend the service life of the equipment, the two-component sealant manufacturer will share the safety precautions for the use of the sealant.

1、禁止将废胶滴落在地面上。

1. It is forbidden to drop waste glue on the ground.

2、禁止将废胶桶排放到工业垃圾库。

2. It is prohibited to discharge the waste rubber bucket to the industrial garbage bin.

3、禁止在工作中接触泵的运行部件。

3. Do not touch the running parts of the pump during operation.

4、禁止直接用手堵漏。

4. It is prohibited to plug the leakage directly by hand.

5、禁止用易燃物冲洗设备。

5. It is prohibited to flush the equipment with inflammable materials.

6、禁止超过泵及液压元件地限制压力使用。

6. It is prohibited to use beyond the limit pressure of the pump and hydraulic components.

此外要求非专门的维修人员，不得维修调试机器。操作者必须熟悉本机性能和机构，了解应用范围及本工技术规程掌握操作规程。工作前操作人员必须检查设备是否完好，气源、电源须处于正常状态，保护装置完好，并符合工艺要求。操作人员须正确穿戴劳保用品。操作者不得用手或身体其他部位接触涂胶设备；不准把涂胶口对准任何人，停止涂胶时，操作者应当锁住扳机。工作完毕后，停止压缩气缸，按下停止按钮，清理机床，清理胶阀，关闭电源与气源并填写好点检表。工作完毕后或长期不用时，应关闭加热电源与气源。

In addition, non specialized maintenance personnel are required not to repair and debug the machine. The operator must be familiar with the performance and mechanism of the machine, understand the scope of application and the professional technical procedures of the machine, and master the safety operation procedures. Before work, the operator must check whether the equipment is in good condition, whether the air source and power supply are in normal condition, whether the safety protection device is in good condition and meet the process requirements. Operators must wear labor protection appliances correctly. The operator shall not touch the gluing equipment with his hands or other parts of his body; It is not allowed to aim the gluing port at anyone. When stopping gluing, the operator should lock the trigger. After the work is completed, stop the compression cylinder, press the stop button, clean the machine tool, clean the rubber valve, turn off the power and air supply, and fill in the spot check table. After the work is completed or when it is not used for a long time, the heating power and air supply should be turned off.

以上就是关于打胶机的使用禁止事项，希望能给大家带来帮助。如有需要，欢迎广大客户前来咨询http://www.jntiannuo.com，我们竭诚为您提供优良的技术指导及良好服务。

The above is about the use of glue machine safety prohibitions, I hope to help you. If necessary, welcome customers to consult http://www.jntiannuo.com We will wholeheartedly provide you with excellent technical guidance and good service.