从目前数据来看，双组份打胶机的故障重要出自这几方面，下面和小编一起来了解了解吧。

From the current data, the faults of the two-component sealant dispenser mainly come from these aspects. Let's learn about them together with the small editor.

1.小零件的损坏

1. Damage of small parts

双组份打胶机的小吸盘和定位滑轮的损坏是比较常见的。通常就是单纯的由于使用工作时间过长，所以导致的损坏。这些零件在方面也是比较便宜的。

The damage of the small suction cup and positioning pulley of the two-component sealant beater is relatively common. Usually, it is simply the damage caused by using and working for too long. These parts are also relatively cheap in terms of price.

2.智能压力仪表

2. Intelligent pressure instrument

这方面可能让很多人表示惊讶，怎么会呢？这个不可能爱坏。虽然从某种意义上来说，他的使用频率不会那么高，不是工人直接接触的。但是在双组份打胶机的供胶机上有很多的智能压力仪表，目的就是保证正常的工作进行。所以很难保证每一块智能压力表的长久良好运行。

This may surprise many people. How could it be? This can't be bad. Although in a sense, the frequency of its use is not so high, and it is not directly contacted by workers. However, there are many intelligent pressure instruments on the glue feeder of the two-component glue dispenser to ensure normal operation. Therefore, it is difficult to ensure the long-term good operation of each intelligent pressure gauge.

智能压力仪表的，可能要比小吸盘和定位滑轮的稍贵一点。但是因为它的损坏频率不高，所以还在大家的接受范围内。

The price of intelligent pressure instrument may be a little more expensive than that of small suction cup and positioning pulley. However, because its damage frequency is not high, it is still acceptable.

双组份打胶机在运行过程中，中间的内部零件要承受着使用磨损。刚开始的时候，在使用的时候还不明显，但是随着使用时间的增长，整体的运行状态也会不断的变化，双组份打胶机有些性能也会逐渐下降。更严重的可能导致发生零件（元件）的失效。

During the operation of the two-component sealant applicator, the internal parts in the middle should bear the wear and tear. At the beginning, it was not obvious when it was used, but with the increase of the use time, the overall operating state would also change constantly, and some properties of the two-component rubber beater would also gradually decline. More serious may lead to failure of parts (components).

一般故障是指双组份打胶机丧失或降低其规定功能的现象。双组份打胶机是为满足生产工艺要求或为完成工程项目的预期功能而配备的，大大的加快了中空玻璃加工的效率。

General failure refers to the phenomenon that the two-component sealant dispenser loses or reduces its specified function. The two-component sealant beater is equipped to meet the production process requirements or to complete the expected functions of the project, greatly speeding up the efficiency of insulating glass processing.

双组份打胶机的功能体现着它在生产活动中存在的价值和对生产的保证程度。双组份打胶机故障会严重影响企业产品的数量和质量，因而须探索故障发生的规律；对故障进行管理、记录；对故障机理进行分析，采取有效措施控制故障的发生。

The function of the two-component rubber beater reflects its value in production activities and the degree of assurance for production. The failure of two-component rubber beater will seriously affect the quantity and quality of enterprise products, so it is necessary to explore the rule of failure occurrence; Manage and record faults; The failure mechanism is analyzed, and effective measures are taken to control the failure.

刚刚说了对于双组份打胶机的故障分析以及使用性能，我们在希望对你们起到帮助。如果大家还有疑问可以来我们网站http://www.jntiannuo.com咨询看看，也可以留言联系采购信息！

We just mentioned the fault analysis and performance of the two-component sealant dispenser. We hope we can help you. If you have any questions, you can come to our website http://www.jntiannuo.com Consult, or leave a message to contact the purchase information!