双组份打胶机要有效延长其使用寿命，在日常生活中就需要注意它的维护和保养。那么双组份打胶机日常维护和保养方法有哪些呢?

In order to effectively extend the service life of the two-component sealant dispenser, attention should be paid to its maintenance in daily life. So what are the daily maintenance methods of two-component sealant dispenser?

要完全掌握了双组份打胶机的操作知识，再进行设备的操作。开机前应先检查一下电源、电压是否稳定。开启机器后，要注意机器有没有发出不正常的声音，如果有，应立刻关闭机器。如果使用的设备需要与皮肤接触时，应当提前做好防护措施。

It is necessary to fully master the operating knowledge of the two-component sealant dispenser before operating the equipment. Before starting the machine, check whether the power supply and voltage are stable. After starting the machine, pay attention to whether the machine makes abnormal noise. If so, shut down the machine immediately. If the equipment used needs to contact with skin, protective measures shall be taken in advance.

在大量使用前，请先小量试用，掌握产品的使用技巧，以免出现差错。当测试无问题后，再用双组份打胶机进行大批量生产。

Before using the product in large quantities, please try it in small quantities to master the use skills of the product to avoid mistakes. When there is no problem in the test, use the two-component sealant machine for mass production.

批量生产的质量一致性对产品品质来讲是重要的，因此为保证胶条的质量，在生产前进行比例测试。比例测试目的在于检测A、B胶的供料量是否准确。

The quality consistency of batch production is important to the product quality. Therefore, in order to ensure the quality of the adhesive strip, the proportion test shall be carried out before production. The purpose of proportion test is to check whether the feeding amount of glue A and glue B is accurate.

A与B的具体比例应根据胶水供应商提供的数据进行设置，测试结果对照技术参数，在合理误差内均可认为是准确的比例。在保证比例准确的时候，使用者就可以进行量产了。

The specific proportion of A and B shall be set according to the data provided by the glue supplier. The test results can be considered as accurate within a reasonable error compared with the technical parameters. When the proportion is accurate, users can conduct mass production.

双组份打胶机在很多行业都会用到，企业在使用双组份打胶机过程中不仅会考虑到双组份打胶机的点胶质量、工作效率，还会考虑到它的使用寿命。以上就是有关的方法了，您对此有什么想咨询的随时来我们网站http://www.jntiannuo.com看看！

The two-component glue dispenser is used in many industries. When using the two-component glue dispenser, enterprises will not only consider the dispensing quality and work efficiency of the two-component glue dispenser, but also consider its service life. The above is the relevant method. If you have any questions, please come to our website at any time http://www.jntiannuo.com have a look!