随着市场竞争的日益激烈，一些制造商运用残次的丁基胶，其间的杂质很多。假如长时刻运用，双组份打胶机的胶枪会被阻塞。那咱们该怎么办呢?

With the increasingly fierce market competition, some manufacturers use defective butyl rubber, which has many impurities. If it is used for a long time, the glue gun of the two-component glue dispenser will be blocked. So what should we do?

双组份打胶机阻塞的原因：

Reasons for blocking of two-component sealant dispenser:

1.在涂胶过程中，中止时刻较长，或多次堆集，而且在上胶结束时无法完成清洁，特别是在夏日温度较高时。

1. In the process of gluing, the center stops for a long time or accumulates for many times, and the cleaning cannot be completed at the end of gluing, especially when the temperature is high in summer.

2.AB成分的气压缺乏，导致混合不均匀，凝胶缓慢，简单发生颗粒

2. Lack of air pressure of AB component leads to uneven mixing, slow gel and simple particles

3.B组件未经检查和清洁。B成分对水蒸气敏感。由于运送和储存环境等偶尔因素，B组分的外表可能会结皮，外壳的一部分被压入管道中，这很简单发生颗粒。

3. Component B is not inspected and cleaned. Component B is sensitive to water vapor. Due to occasional factors such as transportation and storage environment, the appearance of component B may be skinned, and part of the shell is pressed into the pipe, which is simple to cause particles.

4.过滤器和单向止回阀长时刻未清洗。

4. The filter and one-way check valve have not been cleaned for a long time.

5.B组件压板上的O形圈，运用时刻长，松动。

5. The O-ring on the pressing plate of B component has been used for a long time and is loose.

双组份打胶机阻塞解决方案：

Blocking solution for two-component sealant dispenser:

1、断开胶水需求花费多长时刻，主张在断开时刻之前，依据每天的温度和湿度的不同，在每天施加胶水之前丈量剥离时刻。另外，目前的客户常常要求胶水的固化时刻要快，中止时刻要长一些，而且简单引起颗粒的呈现。

1. How long does it take to disconnect the glue? It is recommended to measure the stripping time before disconnecting the glue according to the temperature and humidity of each day. In addition, current customers often require that the curing time of glue should be fast, the stopping time should be longer, and the particles simply appear.

2、简单的处理办法是运用刮刀清洁外壳，而不影响胶水的运用。

2. A simple solution is to use a scraper to clean the shell without affecting the use of glue.

3、主张定期清洁过滤器，单向止回阀，静态混合器和胶枪。

3. It is recommended to clean the filter, one-way check valve, static mixer and glue gun regularly.

本公司所生产的产品稳定性好，效率高,维护方便,关注我们网站http://www.jntiannuo.com，厂家真诚期待你的来电与咨询！

The products produced by our company have good stability, high efficiency and convenient maintenance. Pay attention to our website http://www.jntiannuo.com The manufacturer sincerely looks forward to your call and consultation!