打胶机的打胶环节和打胶机之间的关系
可能很多人会疑问，双组份打胶机的打胶环节和打胶机有什么关系。接下来，小编就给大家一起来说一下
济南双组份打胶机的打胶环节和打胶机的关系。
Many people may wonder what is the relationship between the gluing link of the two-component gluing machine and the gluing machine. Next, let's talk about the relationship between the gluing link of Jinan two-component gluing machine and the gluing machine.
一块合格的打胶机不仅在于规范的操作流程与的工艺技术，更需要能满足打胶机性能的打胶机加工设备和与其相关的密封材料。不同的打胶机的密封差异可能让打胶机终呈现的工艺成品以及综合性能不同。
A qualified glue applicator not only lies in the standardized operation process and perfect technology, but also needs the glue applicator processing equipment and related sealing materials that can meet the performance of the glue applicator. The sealing difference of different glue applicators may make the final finished products and comprehensive performance of the glue applicator different.
打胶机的密封主要采用密封胶，起到打胶机的密封作用。打胶机的密封，除紫外线照射是测试打胶机密封胶是否含有影响视线的有机挥发物外，另外四项指标“密封性能、初始露点、高温高湿、气候循环”，都是检测打胶机在各种环境下的密封性能的。打胶机的密封主要采用密封胶，起到打胶机的密封作用。
Sealant is mainly used for the sealing of glue applicator, which plays the sealing role of glue applicator. For the sealing of the glue applicator, in addition to ultraviolet radiation, which is used to test whether the confidential sealing glue contains organic volatiles that affect the line of sight, the other four indicators "sealing performance, initial dew point, high temperature and humidity, and climate cycle" are used to test the sealing performance of the glue applicator in various environments. Sealant is mainly used for the sealing of glue applicator, which plays the sealing role of glue applicator.
单道密封打胶机是难以满足打胶机的密封性能的。为弥补这些胶的密封性能的不足，通常采用水汽透过率低，但结构性差的聚异丁烯胶作为打胶机的道密封胶，以阻止潮气向打胶机内渗透，这就是传统的大家熟悉的双道密封打胶机的生产工艺。
Single pass sealing glue applicator is difficult to meet the sealing performance of glue applicator. In order to make up for the lack of sealing performance of these adhesives, polyisobutylene adhesive with low water vapor transmission but poor structure is usually used as the first sealant of the glue applicator to prevent moisture from penetrating into the glue applicator. This is the traditional production technology of double seal glue applicator that everyone is familiar with.
由于双道密封打胶机所采用的二种密封胶各自性能上的缺陷，只能采用两者结合的方式（即双道密封式）才能满足打胶机的密封性和结构性指标。现在有一些新型打胶机密封胶：结构型热熔丁基密封胶。
Due to the defects in the performance of the two sealants used by the double seal glue applicator, only the combination of the two (i.e. double seal type) can meet the sealing and structural indicators of the glue applicator. Now there are some new types of sealant: structural hot melt butyl sealant.
打胶机主要用于打胶机的打胶环节，也就是我们平时所说的密封环节。打胶机主要针对打胶机的道密封。使用专用设备将热熔丁基胶加热熔化后，用打胶机将丁基胶涂打胶机的涂胶部位。
The gluing machine is mainly used for the gluing link of the gluing machine, which is what we usually call the sealing link. The glue applicator is mainly for the first seal of the glue applicator. Use special equipment to heat and melt the hot-melt butyl adhesive, and then apply the butyl adhesive to the gluing part of the gluing machine with a gluing machine.
这个打胶速度要掌握好，因为丁基胶几分钟就冷却定型，打胶速度不宜过快过慢。过快的情况下很容易导致打胶不饱满，日后影响打胶机的密封问题。过慢的情况下影响打胶机的工作效率问题。
The gluing speed should be well controlled, because the butyl glue will be cooled and shaped in a few minutes, and the gluing speed should not be too fast or too slow. If it is too fast, it is easy to cause insufficient gluing, which will affect the sealing of the gluer in the future. Too slow affects the working efficiency of the glue applicator.
The relationship between the gluing link of the gluing machine and the gluing machine is what we have explained above. If you still don't understand this, please come to our website http://www.jntiannuo.com Consult and have a look.
上一篇：二手打胶机如何挑选不踩雷
下一篇：关于打胶机的一些问题分析
