Many people are asking, what is the difference between dispensing machine and filling machine? Isn't it the automatic equipment for fluid control? What's the difference. Let's first understand what is glue filling machine and dispensing machine, and what is the difference.

一、什么是点胶机？

1、 What is a dispensing machine?

点胶机也叫灌胶机，是专门对流体进行控制的设备。主要将流体点滴、涂覆于产品表面或产品内部的自动化机器，可实现三维、四维路径点胶，准确定位，准确控胶，不拉丝，不漏胶，不滴胶。

Dispensing machine, also known as glue filling machine, is a special equipment for fluid control. The automatic machine mainly drips and coats the fluid on the product surface or inside the product, which can realize three-dimensional and four-dimensional path dispensing, accurate positioning, accurate glue control, no wire drawing, no glue leakage and no glue dripping.

二、什么是灌胶机？

2、 What is a glue filling machine?

灌胶机，是专门对流体进行控制的设备，并将液体点滴、涂覆、灌封于产品表面或产品内部的自动化机器，使其达到密封、固定、防水等作用的设备，一般使用的多为双组份胶水。也分自动灌胶机及真空灌胶机。

Glue filling machine is an automatic machine that specially controls the fluid and drips, coats and seals the liquid on the surface or inside of the product to achieve the functions of sealing, fixing and waterproof. Generally, two-component glue is used. It is also divided into automatic glue filling machine and vacuum glue filling machine.

三、灌胶机和点胶机区别：

3、 Difference between glue filling machine and dispensing machine:

、控胶方式不同：目前市场上大部分的点胶机都还是主要是靠气压来控制出胶的，当然现在也有不用气压控制的。而灌胶机主要就是靠计量泵来控制出胶的，通过调节泵的转速来调节出胶量的大小。

Different glue control methods: at present, most dispensing machines in the market mainly rely on air pressure to control the glue output. Of course, there are some that do not need air pressure control. The glue filling machine mainly depends on the metering pump to control the glue output, and the glue output is adjusted by adjusting the speed of the pump.

2、出胶量大小不同：相对来说，灌胶机小出胶量大于点胶机，而灌胶机的出胶量大能达到十几到二十几克每秒，而点胶机的出胶量较小，有的点胶机小出胶量可达到0.001g。

2. The glue output is different: relatively speaking, the glue output of the glue dispenser is smaller than that of the glue dispenser, while the glue output of the glue dispenser is large, which can reach more than ten to twenty grams per second, while the glue output of the glue dispenser is small, and the glue output of some glue dispensers can reach 0.001g.

3、点胶精度不同：通常点胶机用胶量小、精度高，而灌胶机用胶量大，用胶精度略低。

3. Different dispensing accuracy: generally, the dispensing machine uses a small amount of glue and has high precision, while the glue filling machine uses a large amount of glue and has a slightly lower precision.

4、适用胶水不同：点胶机适用单液（单组份）胶水的产品工艺用胶。灌胶机适用双液（双组份，也叫AB胶）胶水，的产品工艺用胶，两者之间相差很大。

4. Different applicable glues: the dispensing machine is suitable for the product process glue of single liquid (single component) glue. The glue filling machine is suitable for two-liquid (two-component, also known as AB glue) glue. There is a great difference between the two.

以上精彩内容由济南双组份打胶机提供，请多咨询请关注http://www.jntiannuo.com

The above wonderful contents are provided by Jinan two-component gluing machine. Please consult and pay attention:http://www.jntiannuo.com