For the increasingly mature insulating glass industry, the adhesive tape insulating glass is aging, and the slotted aluminum insulating glass has attracted more attention. The beautiful appearance has become people's favorite glass, otherwise its production process is still very good. After finishing, what are the specific features of the two-component gluing machine manufacturer will tell you:

1.用于粘合的垫片需要开槽的铝中空玻璃组件：

1. Aluminum insulating glass assembly with slotted gasket for bonding:

带槽铝中空玻璃的生产环境要求较高，温度应为10-30℃，相对湿度更好低于70%。 干燥剂应从正规制造商那里选择合格的产品，以确保干燥剂的有效使用。 更好在打开后24小时内使用干燥剂。

The temperature should be 10-30 ℃ and the relative humidity should be lower than 70%. Desiccant should choose qualified products from regular manufacturers to ensure the effective use of desiccant. It is best to use desiccant within 24 hours of opening.

2.两组分涂胶机垫片胶-密封

2. Two component gluing machine gasket glue - first seal

使用丁基橡胶作为密封件起到阻气作用，使用聚硫橡胶或聚硅氧烷胶作为第二密封件，主要作用是附着力作用，其次是气体阻隔作用。 实践证明，单次通过中空玻璃的寿命只有5年左右，而二次通过中空玻璃的寿命可以达到20年甚40年以上。 因此，发展双通道密封中空玻璃是大势所趋。

Butyl rubber is used as the first seal to block the gas, while polysulfide rubber or polysiloxane rubber is used as the second seal. The main function is adhesion, followed by gas barrier. Practice has proved that the life span of single pass through insulating glass is only about 5 years, while that of secondary passing through insulating glass can reach 20 years or even more than 40 years. Therefore, the development of double channel sealed insulating glass is the general trend.

玻璃压片和双组份打胶机的应用：

Application of glass pressing machine and two-component gluing machine:

(1)将组合后的两种玻璃成分送入压力机中，使丁基胶均匀地粘结在玻璃和空间框架上，确保中空玻璃的总厚度，从而使两块玻璃片 成为“整合”。

(1) The combined two kinds of glass components are fed into the press, so that butyl rubber is uniformly bonded to the glass and space frame, so as to ensure the total thickness of the insulating glass, so that the two pieces of glass become "integration".

(2)垫片框架的外边缘与玻璃边缘之间的距离应为5-7mm。 用于涂覆第二密封胶。 胶水应沿一侧均匀涂抹，以防止出现气泡。 涂层后，刮擦玻璃表面残留物。

(2) The distance between the outer edge of the gasket frame and the glass edge shall be 5-7mm. For applying a second sealant. Glue should be applied evenly along one side to prevent bubbles. After coating, scrape the residue on the glass surface.

3.中空玻璃的第二封口胶机，使用中空玻璃双组份打胶机。

3. The second sealing glue machine of insulating glass uses insulating glass two-component gluing machine.

4.中空玻璃的放置：

4. Placement of insulating glass:

中空玻璃的正确放置也会影响中空玻璃的更终质量。 无论是在生产，运输还是在现场存储，，堆叠架的设计要求必须考虑中空玻璃的特性，并且堆叠架必须具有一定的倾斜度。

The correct placement of insulating glass will also affect the final quality of insulating glass. Whether in production, transportation or on-site storage, firstly, the characteristics of insulating glass must be considered in the design of stacking frame, and the stacking frame must have a certain inclination.

中空玻璃的生产过程非常简单，关键是要查看所使用的配置设备，只有正确的设备才能更地工作。

The production process of insulating glass is very simple, the key is to check the configuration equipment used, only the correct equipment can work more efficiently.