The two-component gluing machine is divided into automatic, semi-automatic and fully automatic. Many customers do not understand how to start the machine and how to operate it. Next, I will tell you how to do it.

首要要了解为什么要运用双组份打胶机来工作

First of all, we should understand why we should use the two-component glue machine to work

设备运用的重要性：中空玻璃在制作过程中，有一个环节是非常关键的，便是用结构胶将两片玻玻璃彻底密封，因为人工打胶慢，关闭不好，所以大量的出产中空玻璃就需要设备。

The importance of equipment application: in the production process of insulating glass, there is a key link, that is, to seal the two pieces of glass completely with structural adhesive. Because manual gluing is slow and the closing is not good, it is necessary to produce a large number of insulating glass with equipment.

双组份打胶机的操作方法：

Operation method of two-component gluing machine:

1、首要打开气泵开关，电源总开关，控制台开关，在控制台按手动按钮

1. First turn on the air pump switch, the main power switch, the console switch, and press the manual button in the console

2、然后在双组份打胶机的显现屏上找到原点设定，点击辅助原点设定，然后点击头部原点设定

2. Then find the origin setting on the display screen of the two-component gluing machine, click the auxiliary origin setting, and then click the head origin setting

3、注意原点设定时避免头部和辅助吸盘碰撞。等设定好然后回来找到玻璃厚度设定

3. Pay attention to avoid collision between the head and the auxiliary suction cup when setting the origin. Wait until it's set and come back to find the glass thickness setting

4、先是玻璃的厚度然后是铝隔条然后还是玻璃的厚度

4. First the thickness of the glass, then the aluminum spacer, and then the thickness of the glass

5、输入完以后，点击设置进入。等指令方位和当前方位数值共同即可，注意设置时传送带上不要有玻璃。

5. After input, click settings to enter. It is OK to wait for the command orientation and the current orientation value to be common. Note that there is no glass on the conveyor belt when setting.

双组份打胶机操作时状况剖析：

Analysis of the operation condition of the two-component glue applicator

1、双组份打胶机开始打胶要看每条边每个角打胶是否均匀

1. When the two-component gluing machine starts to apply glue, it depends on whether the glue is evenly applied at each edge and corner

2、在屏幕上点击回来找到密封配方，点击进入，会显现当前密封压力

2. Click back on the screen to find the sealing formula. Click enter to display the current sealing pressure

3、如果每条边都缺胶，那么可增加压力，压力大胶量大，压力小胶量就小。

3. If each side is short of glue, then the pressure can be increased. If the pressure is large, the glue quantity is small when the pressure is small.