All the equipments need to be repaired before leaving the factory. Automatic dispenser as a precision instrument, the maintenance process is more strict. The general process is mainly divided into three steps: first, the commissioning process of the automatic dispensing machine; second, the verification and installation process before delivery; third, the commissioning process to the manufacturer. Moreover, it should be accompanied by relevant certificates of commodities. Here, the method of judgment is listed for your reference.

一、检修需求：

1、 Maintenance requirements:

1.全自动点胶机的外观不能泛起影响正常工作和正常读数的机械损伤和侵蚀，表面喷漆平整，厚度平均，无杂质。

1. The appearance of the automatic dispenser shall not cause mechanical damage and erosion that may affect normal operation and normal reading. The surface shall be smooth with average thickness and no impurities.

2.内部器件与表壳的连接牢固，电控柜内线路整洁，线号齐全，设备内部无异响

2. The internal devices and the watch case are firmly connected, the lines in the electric control cabinet are clean, the wire numbers are complete, and there is no abnormal sound inside the equipment

3.表盘上的刻度和数字应清晰，无痕迹

3. The scale and number on the dial should be clear without trace

4.设备能够自行运行，运行不乱可靠，无异常响动，可以连续运行一周，无端障发生。

4. The equipment can run on its own without disorder and reliability, without abnormal sound, and can operate continuously for a week without end barrier.

5.启动点胶机，点胶机显示器正常显示参数，气压计显示无显著波动。

5. Start the dispenser, the dispenser display will display normal parameters, and the barometer display will not fluctuate significantly.

6.启动点胶机控制按钮，出气口有气流冲出，并且可以按照设置的出气时间和回吸时间完成动作。无漏气题目

6. Start the dispenser control button, the air outlet has air flow, and the action can be completed according to the set exhaust time and suction time. No air leakage

7.全自动点胶性能够进行连续性出产24小时以上，设备整体美观大方，布局公道，设备各部件不能有漏电，漏水,漏油等现象。

7. The full-automatic gluing can be continuously produced for more than 24 hours. The overall appearance of the equipment is elegant and the layout is fair. All parts of the equipment can not have leakage, water leakage and oil leakage.

8.在全自动点胶机的试运行期间，无重要部件的损坏(人为原因除外)重要部件包括：电磁阀,电机,油马达,油泵,链条,油缸,PLC以及电脑等。

8. During the trial operation of the automatic dispensing machine, there is no damage to important parts (except for human reasons). The important parts include: solenoid valve, motor, oil motor, oil pump, chain, oil cylinder, PLC and computer.

9.出产的产品，知足质量、节拍等合同需求(模具原因除外)。

9. The products produced shall meet the contract requirements of quality and beat (except for mould reasons).

二、全自动点胶机的全部技术资料预备齐全

2、 All technical data of automatic dispensing machine are ready

1.全自动点胶机操纵维护保养仿单：设备整体平面布置图、电气原理图、工作原理图、气动、液压原理图，

1. Operation and maintenance copy sheet of automatic dispenser: overall layout of equipment, electrical schematic diagram, working principle diagram, pneumatic and hydraulic schematic diagram,

2.全自动点胶机培训资料，光盘。

2. Safety training materials and CD for automatic dispenser.

3.备件明细表

3. Spare parts list

4.计量仪器、仪表应提供计量合格证

4. Measuring instruments and meters shall be provided with measurement certificate

全自动点胶机安装完成后，进行试出产，试出产中同时对系统参数进行调试。 试出产一个月后,双方进行全自动点胶机的正式检修. 在设备调整期间泛起非人为破坏的质量题目均可视为分歧格商品。

After the installation of the automatic dispensing machine, the trial production is carried out, and the system parameters are debugged during the trial production. After one month of trial production, the two sides carry out the formal maintenance of the automatic dispenser. During the adjustment of the equipment, the quality problems caused by non-human damage can be regarded as different goods.