In the use of double component glue machine, it is easy to cause extreme damage because of improper operation. In use, we should pay attention to several aspects.

1、在当天机器操作完毕后要把胶管内的胶冲出，防止硬化；如果长时间不实用要注意用煤油清洗胶管和胶枪。

1, after the machine is finished on the same day, the glue in the rubber hose will be washed out to prevent the hardening. If it is not practical for a long time, use kerosene to clean the rubber hose and glue gun.

2、双组份打胶机使用的硅酮胶或聚硫胶要注意杂质不能过高，低质量的胶容易堵塞胶管的过滤系统，造成出胶不畅或不均匀。

2, the silicone rubber or polysulfide glue used for the two component glue dispenser should pay attention to the impurities can not be too high. The glue with low quality is easy to clog up the filtration system of the rubber hose, resulting in the gel is not smooth or uneven.

3、在更换胶的品种时要特别注意把双组份打胶机内残留的胶冲净，好清洗，因为不同品种甚的胶容易反应堵塞机器。

3, when changing the varieties of rubber, we should pay special attention to the remaining glue in the two component glue machine. We should clean it, because different brands and even the brand glue are easy to react and block the machine.

双组份打胶机也叫中空玻璃打胶机，是目前中空玻璃比较好的打胶机器，其性能远超热熔胶打胶机，使用寿命较长，机器使用寿命在10年左右，操作和保养较好使用时间更长，平时更换易损件即可。

A two-component glue machine also called hollow glass glue machine, hollow glass is currently relatively good glue machine, its performance is far beyond the hot melt glue machine, long service life, the service life of the machine in 10 years or so, the operation and maintenance of good use of time longer, usually worn parts can be.

本文由双组份打胶机友情奉献,更多有关的知识请点击:http://www.jntiannuo.com我们将用的技术，

This article is made up of two component glue machines, more related knowledge, please click: http://www.jntiannuo.com we will use the most advanced technology,