In the real work, when many hand scrape glue, the hollow glass made by hand leaks, which leads to the unqualified products and the efficiency is difficult to keep up with. So how does Jinan two-component gluing machine solve the problem of air leakage?

打开双组份打胶机气泵开关，电源总开关，控制台开关，在控制台按手动按钮，然后在显示屏上找到原点设定，点击辅助原点设定，然后点击头部原点设定，注意原点设定时避免头部和辅助吸盘碰撞。等设定好然后返回找到玻璃厚度设定，先是玻璃的厚度然后是铝隔条然后还是玻璃的厚度，输入完以后，点击设置进入。等命令位置和当前位置数值一致即可，注意设置时传送带上不要有玻璃。

First, turn on the air pump switch, main power switch and console switch of the two-component gluing machine. Press the manual button on the console, then find the origin setting on the display screen, click the auxiliary origin setting, and then click the head origin setting. Pay attention to avoid collision between the head and the auxiliary suction cup when setting the origin. After setting, return to find the glass thickness setting. First, the thickness of the glass, then the aluminum spacer, and then the thickness of the glass. After input, click settings to enter. Wait for the command position to be consistent with the current position value. Pay attention to no glass on the conveyor belt when setting.

济南双组份打胶机然后是混交了，按桶胶按钮，按工作选择按钮，然后按拍胶启动，在按伐开，此时胶头以出胶，等看不见白胶，以混均匀以后按伐关，在按链接生产线，自动，自动运行，此时可以自动打胶。

Jinan two-component gluing machine is then mixed. Press the first barrel glue button, press the work selection button, and then press the tapping button to start. At this time, the glue head will come out of the glue, and the white glue can not be seen. After mixing evenly, press the cutting off, and then press the link production line to operate automatically and automatically. At this time, the glue can be automatically applied.

济南双组份打胶机开始打胶要看每条边每个角打胶是否均匀，下面说下如何调整打胶机，在屏幕上点击返回找到密封配方，点击进入，会显示当前密封压力，如果每条边都缺胶，那么可增加压力，压力大胶量大，压力小胶量就小。

Jinan two-component gluing machine starts to glue to see whether each edge and corner are evenly applied. The following is how to adjust the glue applicator. Click back on the screen to find the sealing formula. Click enter to display the current sealing pressure. If each side is short of glue, increase the pressure. If the pressure is large, the glue quantity is small.

做好中空玻璃非常简单，只需要有一个好的双组份打胶机，才能做出质量的产品，欢迎咨询我们。

Good insulating glass is very simple, only need to have a good two-component glue machine, to make perfect quality products, welcome to consult us.