In order to adapt to different needs, there are various types of glue applicators in the market, and the double liquid gluing machine is currently widely used equipment, which will be used in many industries. What problems should be considered when selecting the double liquid glue machine?

AB环氧树脂、AB聚氨酯、AB有机硅等这些胶水都是十分常用，对于使用双液混合点胶粘结效果的需求，选用双液打胶机能比普通打胶机实现更好的效果，双液打胶机能够根据不同的混合胶水比例可以很好的把握胶水的固化时间，从而更利于产线生产的需要！

AB epoxy resin, AB polyurethane, AB silicone and other glues are very commonly used. For the need of using the two-liquid mixing dispensing adhesive effect, the double-liquid gluing machine can achieve better results than the ordinary one. The two-liquid glue applicator can grasp the curing time of glue according to the different proportion of mixed glue, which is more conducive to the needs of production line production!

选用双液打胶机需要考虑的问题：

The problems to be considered in the selection of double liquid glue applicator are as follows:

所用胶水的混合比例：任何一种打胶机对胶水的混合比例都有一个范围，常见的有100：100——100：10；如果所用的胶水不在这个范围，那就要重新考虑了。

Mixing ratio of glue used: there is a range for the mixing ratio of glue for any glue applicator, which is usually 100:100-100:10; if the glue used is not in this range, it needs to be reconsidered.

济南双组份打胶机

Jinan two component gluing machine

胶水里面有没有填料：双液灌胶机控制出胶量的方式有两种，一种是通过齿轮泵，一种是通过螺杆泵！齿轮泵在遇到含有填料的胶水时，时间久了易磨损，进而造成出胶量不准，混合比例不精准，出现点出来的产品长时间不干。螺杆泵相比较而言，较耐磨损一些，这些都是根据需求进行选择！

Whether there are fillers in the glue: there are two ways to control the glue output of the double liquid glue filling machine, one is through the gear pump, the other is through the screw pump! Gear pump in the presence of filler glue, for a long time easy to wear, resulting in inaccurate glue output, mixing ratio is not accurate, point out the product does not dry for a long time. Screw pump in comparison, more wear-resistant some, these are based on demand for selection!

产品点胶需求：要考虑产品每次限制小的点胶量是多少，比如要点的产品是1克，胶水配比是10：1，那相当于B胶的出胶量要达到0.1克，机器的限制小出胶量是多少，你买机器时就要对比比较，看能否达到要求！

Product dispensing demand: to consider the product limit each time the small amount of dispensing is, for example, the key product is 1g, the glue ratio is 10:1, which is equivalent to the glue output of glue B to reach 0.1g, the machine limit is small, how much is the glue, you should compare and compare when you buy the machine, to see if you can meet the requirements!

产量效率：生产量大的话可考虑带XYZ机械手，或者多头的打胶机，虽然这样的设备更高，但是亦都能够带来更好的效率。生产量小的话，用单头打胶机，甚不带XYZ机械手的都可完成！

Production efficiency: if the production volume is large, you can consider the XYZ manipulator or multi head gluing machine. Although the price of such equipment is higher, it can also bring better efficiency. If the production volume is small, it can be completed with single head gluing machine or even without XYZ manipulator!