The two-component gluing machine is divided into automatic two-component gluing machine and semi-automatic two-component gluing machine. The cleaning methods of the two kinds of equipment are basically the same. After application, it must be cleaned. If the two-component glue is not cleaned in time, it will condense in the hose and glue machine, which will affect the normal use in the future.

双组份打胶机的清洁依据下一次涂覆时刻的距离分为两种清洁办法。 一个是日常清洁主要是每个班次完毕后的清洁操作。 还需求进行完全的清洁，这主要是因为设备预备空着，而且这次运用与下次运用之间的距离比较长。 两种清洁办法不同。

According to the distance of the next coating time, the cleaning of the two-component dispenser can be divided into two cleaning methods. One is that the daily cleaning is mainly the cleaning operation after each shift. It also requires complete cleaning, mainly because the equipment is empty, and the distance between this application and the next application is relatively long. The two cleaning methods are different.

完结后，封闭黑色橡胶输送管和压力开关，继续输出白色胶，直到开释的胶中没有黑色停止，然后封闭白色橡胶压力开关，封闭白色橡胶输送开关，清洁完结 完结后。

After the completion, close the black rubber conveying pipe and pressure switch, continue to output the white rubber until there is no black stop in the released rubber, then close the white rubber pressure switch, close the white rubber conveying switch, and after the completion of cleaning.

长时刻(超过15天)需求闲置设备：完结生产任务后，封闭双组份打胶机的压力开关和输出开关，取下并清洗胶枪 用火油清洁胶管，然后用空压机中的高压空气拆解并吹干管中的胶。

Long time (more than 15 days) idle equipment is required: after the completion of the production task, close the pressure switch and output switch of the two-component dispenser, remove and clean the hose with hot oil for the glue gun, and then use the high-pressure air in the air compressor to disassemble and dry the glue in the hose.

以上就是双组份打胶机为大家介绍的如何清洗？更多的详细内容   欢迎来官网咨询客服。

The above is a two-component dispenser for you to introduce how to clean? For more details, please come to the official website for consultation and customer service.