How to clean the two-component dispenser after use? Do you need cleaning? Generally speaking, there is no need to clean. It is different whether the cleaning of the hollow glass dispenser is finished in one shift or it will be empty for a long time

一个班完成后 关闭黑胶输送管和压力开关 继续输出白胶 知道放出的胶里没有一点黑颜色 再关闭白胶压力开关 关闭白胶输送开关===一个班的完工后清洗就完成了

Close the black rubber conveying pipe and pressure switch after one shift, continue to output the white rubber until there is no black color in the released rubber, then close the white rubber pressure switch, close the white rubber conveying switch = = = the cleaning will be completed after one shift is completed

中空玻璃打胶机 比较长时间（15天以上）需要将设备空置：在生产任务完成后 将压力开关和输送开关都关闭后 将胶枪拆卸下来用煤油清洗干净 将输送胶的管子拆卸下来 用空压机的高压空气将管内的胶吹干净

The hollow glass dispenser needs to leave the equipment empty for a long time (more than 15 days): after the production task is completed, turn off the pressure switch and the conveying switch, dismantle the glue gun, clean the rubber conveying pipe with kerosene, dismantle the rubber conveying pipe, and blow the rubber inside the pipe with the high-pressure air of the air compressor