The hollow glass gluing machine reduces the working difficulty of the workers, saves the cost and improves the efficiency. Insulating glass gluing machine is one of the insulating glass production equipment, which is currently selected by small and medium-sized enterprises. So how to install the air circuit of the insulating glass dispenser? Now I'll introduce you to Xiaobian.

1、将中空玻璃打胶机平整的放在地面上。

1. Put the insulating glass gluing machine on the ground.

2、连接三相四芯线，其中黄绿红为火线，蓝色为零线。一定要注意的是黄绿红三根火线一定要连接在对应的L1、L2、L3下方，蓝色零线连在对应的N下方，千万不要接错了哟

2. Connect three-phase four core wires, of which yellow green red is the live wire and blue is the zero wire. It must be noted that the yellow green red three live wires must be connected under the corresponding L1, L2 and L3, and the blue zero wire must be connected under the corresponding n. do not connect them wrong

3、第三步是很细微但是很重要的，就是在连接完之后要确认一下连接是否牢固，避免出现事故

3. The third step is very subtle, but it is very important to confirm whether the connection is firm after the connection to avoid accidents

4、第四步连接气管，气泵输出气管连接一个三通，一路连接打打胶机上，另外的一路连接到供胶机上。

4. The fourth step is to connect the air pipe. The output air pipe of the air pump is connected to a three-way pipe. One is connected to the beater and the other is connected to the glue feeder.

5、第五步同样是需要检查的环节，打开气泵送气，检查各气压表是否正常。

5. The fifth step is also the link to be checked. Turn on the air pump to supply air and check whether the air pressure gauges are normal.

6、第六步闭合空开，送电后打开人机界面，检查是否正常。

6. Step 6 close the air switch, open the man-machine interface after power transmission, and check whether it is normal.

以上就是关于中空玻璃打胶机电路气路的安装方式，希望可以帮助到大家。

The above is about the installation of the air circuit of the hollow glass dispenser. I hope it can help you.