In the rolling process of the colloid and fluid of the automatic dispensing machine, there are corresponding activities between the adjacent fluid layers. The friction between the two layers of fluid is called colloidal viscosity.

自动点胶机胶体粘度对产品的影响：

The influence of colloid viscosity of automatic dispenser on products:

胶体粘度对封装精准度、封装粘结度以及封装总体品质都起着关要紧的用处，所以胶体粘度是自动点胶机在封装过程中越发需求调控的要紧参数值。

Colloidal viscosity plays an important role in the accuracy, adhesion and overall quality of packaging. Therefore, colloidal viscosity is an important parameter for automatic dispenser in the packaging process.

在利用自动点胶机封装设置实行封装过程中，找到每个对胶体的粘度实行操纵的有用步骤，向来是流体操纵设置厂家以及全部行业孜孜以求的要紧课题，接下来自动点胶机厂家为大家介绍一下胶体粘度异常的解决方法。

In the process of using the automatic dispenser to set up the package and implement the package, it has always been an important task for the manufacturers of fluid control and setting and all industries to find out the useful steps to control the viscosity of the colloid. Next, the manufacturers of automatic dispenser will introduce solutions to the abnormal viscosity of the colloid.

自动点胶机胶体粘度异常的解决方法胶体粘度更常利用的一类步骤是装配加热器，这是全部方法中更为常见更快的方法之一。

One of the most commonly used steps is to assemble the heater, which is one of the most common and fastest methods.

在一些特定的封装境遇以及封装条件下，需经过抬高境遇、胶体温度来配合封装过程。由于抬高胶体的温度在一定的大限制下，降低脉冲所导致的温度转变，流体的一致性得以获得保证。

In some specific packaging situations and conditions, it is necessary to raise the environment and gel temperature to match the packaging process. The consistency of the fluid is guaranteed because the temperature of the raised colloid is limited to a certain extent and the temperature change caused by the decreased pulse is reduced.

其它一些需求经过下降胶体粘度来全部封装，对胶体粘度的操纵以及调解也是大水准减削自动点胶机在封装过程中经常会出现的拉丝拖尾的频率，流体在自动点胶机、灌胶机封装过程中的点胶界线、点滴速率以及粘度巨细都对全部封装产品品质感化长远，对胶体的操纵工艺、技巧有待进一步增强。

Some other requirements are all packaged by reducing the viscosity of the gel. The manipulation and adjustment of the viscosity of the gel is also a big level to reduce the frequency of drawing tail that often occurs in the packaging process of the automatic dispenser. The dispensing boundary line, dropping rate and viscosity of the fluid in the packaging process of the automatic dispenser and the filling machine affect the quality of all packaged products for a long time, and the colloid The operation technology and skills need to be further enhanced.