The automatic glue filling machine is a kind of equipment which is specially designed to control the fluid. It is an inevitable trend that the automatic equipment replaces the manual operation in the production reform of the enterprise. The level of automation, to a certain extent, affects the development speed and management level of the enterprise. The main fluid of the automatic glue filling machine is glue. There are many kinds of glue, including single component glue and two-component glue. The dispensing process applied in the actual dispensing operation process will also be very different. The equipment for micro glue control is generally called automatic dispensing machine, and the two-component glue is generally used for filling, filling and sealing, etc., with a large amount of glue, so it is necessary to realize the mixing of glue ratio, so this kind of equipment is called double liquid glue pouring machine.

自动灌胶机设备的主要控胶动力可以分为气动和电动。气动就是以压缩空气来实现，调节气压的大小来达到点胶需求；还有就是电动，电动以点快干胶为主。这里主要介绍以气动作为主要动力的设备，点胶机如果在使用的过程中出现漏气现象，就会直接影响点胶的质量。如果出现了漏气现象，需要先分析是什么原因造成的漏气，然后在根据实际情况进行解决。

The main glue control power of automatic glue filling machine can be divided into pneumatic and electric. Pneumatic is to achieve compressed air, adjust the size of air pressure to meet the dispensing demand; there is also electric, electric to point quick drying rubber. This paper mainly introduces the pneumatic equipment as the main power. If the dispensing machine leaks in the use process, it will directly affect the dispensing quality. If there is air leakage, it is necessary to analyze what causes the air leakage, and then solve it according to the actual situation.

自动灌胶机压力桶如果出现漏气现象，可以通过检查漏气的位置，然后进行判断，压力桶的漏气都为锁紧螺丝没有上紧，还有就是压力桶桶盖和桶体之前的密封点出现破损，具体的解决办法就是更换密封垫，锁紧螺丝。如果是输气管漏气的话，直接更换就可以了，要检查是不是有磨损或者严重的对折，如果气压过大的话，在对折处可能会爆掉。如果是气管与气管之间的转接头出现漏气，那就需要进行更换转接头。如果是控制器里面的电磁阀出现了故障，就需要进行更换了。具体的点胶机漏气可以从以上几个地方进行检查。

If there is air leakage in the pressure barrel of the automatic rubber filling machine, you can check the position of the air leakage, and then judge. The air leakage of the pressure barrel is that the locking screw is not tightened, and the sealing point before the barrel cover and the barrel body is damaged. The specific solution is to replace the sealing gasket and lock the screw. If there is air leakage in the gas transmission pipe, it can be replaced directly. Check whether there is abrasion or serious fold. If the air pressure is too high, it may explode at the fold. If the adapter between the air pipe and the air pipe leaks, the adapter needs to be replaced. If the solenoid valve in the controller fails, it needs to be replaced. Specific dispenser air leakage can be checked from the above several places.