双组份打胶机开机报警的解决方法！
双组份打胶机在使用过程中也会出现一些非常简单的问题，比如报警是怎么回事？往往很简单是事情，让不明白的您措手不及，下面我们给大家讲一下出现的原因以及解决办法，让您万一出现问题的时候能以及的检修，开始工作。
There are also some very simple problems in the use of the two-component dispenser, such as what is the alarm? It's often very simple. You can't understand it by surprise. Let's talk about the causes and solutions, so that you can repair and start work in case of problems.
种情况：就应该是管路堵了，胶压力超高报警，看看胶压力有没有超高，超高的话清洗管路。
The first situation: it should be that the pipeline is blocked, the rubber pressure is too high to alarm, see if the rubber pressure is too high, if it is too high, clean the pipeline.
第二种情况 双组份打胶机看看是不是伺服电机报警，看看配电柜里的伺服控制器有没有报警的。
In the second case, the two-component gluing machine shall check whether the servo motor alarms and the servo controller in the power distribution cabinet alarms.
双组份打胶机故障分析：
Failure analysis of two-component dispenser:
1机头前进定位螺栓松动。解决方法：调节好并固定好。
1. The head forward positioning bolt is loose. Solution: adjust and fix it.
2 玻璃定位松动，使其失去作用。解决方法：调定好定位。
2. The positioning of glass is loose, which makes it useless. Solution: adjust the positioning.
3 活动量太大或吸盘的真空发生器损坏。解决方法：维修。
3. Too much activity or the vacuum generator of suction cup is damaged. Solution: repair.
4前移气缸的前进力量太大。解决方法：调节前进速度。
4 forward cylinder has too much forward force. Solution: adjust the forward speed.
如果您是购买的我们的产品，可以联系我们的业务人员或者售后，我们给您提供电话解决和上门服务，让您一次购买设备，终身无忧。
If you are buying our products, you can contact our business personnel or after-sales service, we provide you with telephone solutions and door-to-door service, so that you can buy equipment once, without worry for life.
This article is published by http://www.jntiannuo.com
上一篇：友人前来公司洽谈业务！
下一篇：灌胶机压力桶的运用方法！
