In the future, the use of hollow glass, hollow glass glue machine, because the glass behind the hollow glass glue seals or structural integrity of the impact, but in the daily use process has to admit that hollow glass is indeed a good building material, sealing and sound insulation and external force performance is very good.

　　中空玻璃打浆机中胶水的使用

　　Use of glue in hollow glass beater

　　中空玻璃胶机是一种常用何时使用胶水,但随着使用胶水的选择根据不同的情况下,我们经常看到一个硅橡胶,和玻璃胶、硅胶等,在日常使用中通常使用胶机将胶直接注入汽缸内两种不同的材料,然后使用一定比例后需要通过定量泵匹配、混合和定量后,注入到产品的使用中空玻璃胶机,但由于一般中空玻璃密封胶机胶使用一些非常大的胶水粘度,所以操作要求非常高,这是非常困难的,所以在使用中空玻璃密封胶机操作和一般胶水机是不同的,中空玻璃胶机工作时主要根据客户提供胶水桶操作规范,和定制的压力板等,在通过压力板胶胶,压盘设置活塞泵和齿轮泵,以上这些都是在准备胶客户使用时只需要把塑料桶在压盘机。

　　Hollow glass glue machine is a kind of professional when to use glue, but with the choice of glue according to different circumstances, we often see a silicone rubber, glass glue, silica gel, etc. In daily use, usually use glue machine to inject glue directly into two different materials in the cylinder, and then use a certain proportion after the need to match, mix and quantify through a quantitative pump, inject into the product. The use of hollow glass glue machine, but because the general hollow glass sealant machine glue used some very large glue viscosity, so the operation requirements are very high, which is very difficult, so in the use of hollow glass sealant machine operation and general glue machine is different, hollow glass glue machine work mainly according to customers to provide glue bucket operation specifications, and customized pressure plate, etc., through the pressure plate. Rubber, pressure plate set up piston pump and gear pump, these are in preparation for rubber customers only need to use plastic buckets in the pressure plate machine.

　　当使用一般根据胶水的性能可分为单组分中空玻璃胶机和中空玻璃双组份胶机,单租一胶机,这种胶水机是一种简单的设备,使用的过程相对简单,只需要用一个压盘将某个组件胶取出,然后到产品里面。

　　When the glue is used, it can be divided into one-component hollow glass glue machine and two-component hollow glass glue machine according to the performance of glue. The glue machine rents one glue machine. This kind of glue machine is a simple equipment. The process of using this glue machine is relatively simple.

　　还有一种是一种双组分胶机器,原理我们知道,几乎是双液点胶机,在工作的时候可以根据客户的要求定制,压盘、压盘需要两个,然后把两个自定义胶筒压盘下,准备和后压盘压力胶配比和混合定量泵,所有完成内部胶产品在未来。

　　Another is a two-component glue dispensing machine. We know that it is almost a two-liquid dispensing machine. When working, it can be customized according to customer's requirements. The platen and platen need two. Then two self-defined rubber cylinder platens are put down to prepare and back platen pressure glue ratio and mixing quantitative pump. All the internal glue products are finished in the future.

　　现在市面上的中空玻璃胶机普遍采用的方式更多的活塞在闹情绪的,因为语言是活塞胶有一个的烟橡胶的过程,但也经常因为操作不准确在中空玻璃胶机、胶线变得不均匀,容易出现或大或小,所以在开发和研究后,中空玻璃能够连续胶胶机,精度和操作很多,和胶水线也变得更加均匀,基本上不会在大、小的情况下发生，另外，配比应根据使用情况来搭配，另外，操作时也要帮助手动式抓胶，也可以使用手动操作。

　　Nowadays, hollow glass glue machines on the market generally adopt more ways for piston to be in a mood, because the language is that piston glue has a professional process of smoke rubber, but often because the operation is not accurate in hollow glass glue machines, glue lines become uneven, easy to appear large or small, so after development and research, hollow glass can be continuous glue machines, accuracy and operation are many, and glue lines. It will also become more uniform, and will not happen in large or small situations. In addition, the proportion should be matched according to the use situation. In addition, manual glue grabbing should also be helpful in operation, and manual operation can also be used.