Knowledge on maintenance of insulating glass equipment

要使得中空玻璃设备运用作用理想，玻璃清洗完全洁净，大程度的延伸其运用寿命，就必需要留意其根本的保养知识。在设备运用过程中留意对其进行正确的保养。如何保养，如此表示。

In order to make the use of hollow glass equipment ideal, glass cleaning completely clean, the maximum extension of its service life, it is necessary to pay attention to its basic maintenance knowledge. In the process of equipment operation, pay attention to proper maintenance. How to maintain it, experts say.

中空玻璃设备的保养总体办法不难，要害是要做好对设备滑轮的保养光滑，确保作业时分的电压安稳，防备电机呈现焚毁的状况，确保设备能够正常运转就能够了。如果设备在作业期间发生了严重的毛病，那么就需求延聘的修理人员前来处理。非人员切莫私行拆机修理。此外需求留意的一点是，当毛病发生需求检修的时分，必需要先把总电源给切断了。在外，还需求留意的事项包含如下：

Maintenance of hollow glass equipment is not difficult in general, the key is to do a good job on the equipment pulley maintenance smooth, to ensure that the operation of the voltage stability, prevent the motor from burning down, to ensure that the normal operation of the equipment can be enough. If serious problems occur during the operation of the equipment, then the need to hire professional repair personnel to deal with. Non professionals should not privately repair the machine. In addition, the need to pay attention to the point is that when the problem occurs when the need to repair, it is necessary to first cut off the total power supply. Besides, the matters needing attention are as follows:

对传送辊的保护。中空玻璃设备的要害零件传送辊必需要留意定时进行光滑处理，在设备运转之前要先查看器光滑状况，看油位线标是否正常，油位必需要坚持在滑标的中心线以上才能够。

Protection for conveyor rollers. The key parts of the hollow glass equipment transfer roller must pay attention to the smooth processing at regular intervals, before running the equipment to check the smooth condition of the device, to see whether the oil level marker is normal, oil level must adhere to the center line above the sliding mark to be able to.

设备系统的水路保护。设备内的水箱要确保系统水循环的正常，每周要对水箱进行一次完全的清洗，要对喷水嘴进行惯例性的查看，一旦发现有堵塞就要立刻进行疏通整理。此外还有风路的保护，设备风机的运转状况要坚持杰出安稳。

Waterway protection for equipment systems. The water tank in the equipment should ensure the normal water circulation of the system. The water tank should be cleaned completely once a week. The nozzle should be checked routinely. Once the blockage is found, the water tank should be dredged immediately. In addition, there is protection of the wind roads, and the operation of the equipment fans must be excellent and stable.