双组份打胶机在使用中应该怎样维护
双组份打胶机在使用中应该怎样维护呢？维护得当，该设备的使用寿命就会大大延长，反之就会变短，可能也经常会有问题。下面小编来讲讲。
How to maintain the two-component sealant dispenser in use? Properly maintained, the service life of the equipment will be greatly extended, otherwise it will be shorter, and there may be problems frequently. Let's talk about it.
1.由于双组份打胶机密封胶的固化需要一定的时间，涂有双组份打胶机密封胶的玻璃应轻轻水平移动。
1. As the curing of two-component sealant requires a certain period of time, the glass coated with two-component sealant shall be gently moved horizontally.
2.双组份打胶机A组、B组胶应保持清洁，防止异物进入胶内。
2. Group A and B glue of two-component sealant applicator shall be kept clean to prevent foreign matters from entering the glue.
3.在连续工作过程中，胶枪每次工作一般不应停止20分钟以上，否则，用A组份胶将混合的胶全部冲洗出来，直到单个组份A胶从枪口排出。
3. In the continuous working process, the glue gun shall not be stopped for more than 20 minutes each time, otherwise, the mixed glue shall be washed out with component A glue until the single component A glue is discharged from the gun mouth.
4.不得强行挤压或弯曲双组份打胶机的高压软管，以免影响系统的正常运行。
4. Do not forcibly squeeze or bend the high-pressure hose of the two-component sealant dispenser, so as not to affect the normal operation of the system.
5.搅胶机应始终保持畅通，以保证出胶效果良好。如有堵塞，可将其浸泡在丙酮中清洗。建议每5组清洗一次。
5. The glue mixer shall always be kept smooth to ensure good glue discharging effect. If there is blockage, soak it in acetone for cleaning. It is recommended to wash every 5 groups.
6.当胶枪长时间不使用时(一周以上)，应将枪体，用溶剂将胶枪和混胶机内残留的胶水清洗干净。
6. When the glue gun is not used for a long time (more than one week), the gun body shall be removed, and the glue left in the glue gun and the glue mixer shall be cleaned with solvent.
7.不同双组份胶厂家生产的胶中杂质含量是不同的。根据实际情况，b组份过滤器和单向阀是否通畅。建议每两组清洗一次。
7. The content of impurities in the adhesive produced by different two-component adhesive manufacturers is different. According to the actual situation, whether the filter and check valve of component b are smooth. It is recommended to wash every two groups.
8.定期对每个泵的加油口加油，确保注油器内有连续的油。
8. Fill the oil filler of each pump regularly to ensure there is continuous oil in the oil injector.
After knowing the daily maintenance points of the two-component sealant dispenser, I believe you also know how to maintain your two-component sealant dispenser. If you don't know anything, please come to our website http://www.jntiannuo.com consulting service
上一篇：如何才能保证打胶机的点胶精度？
下一篇：双组份打胶机在购买前有这些注意事项
