如今为了迎合工业自动化生产的的需求，打胶机设备被广泛运用于更广泛的领域，如:半导体、电子元器件等!碰巧这些领域对打胶机的生产工艺要求很高，那么如何才能保证打胶机的点胶精度呢?下面济南双组份打胶机厂家为您讲解吧。

Nowadays, in order to meet the needs of industrial automation production, the glue applicator equipment is widely used in a wider range of fields, such as semiconductors, electronic components and so on! It happens that these fields have high requirements on the production process of the gluing machine, so how can we ensure the dispensing accuracy of the gluing machine? Let's talk about the Jinan two-component gluing machine manufacturer for you.

1、打胶机用量的设定

1. Setting of glue applicator dosage

一般来说，打胶机的尺寸应该是产品间距的一半，这样可以保证组件有足够的胶水进行粘接，不会有多余的胶水溢出，让打胶机的点胶速度更快更准确!

Generally speaking, the size of the gluing machine should be half of the product spacing, so as to ensure that the components have enough glue for bonding, and there will be no excess glue overflow, so that the dispensing speed of the gluing machine is faster and more accurate!

2、自动上胶机点胶压力设定

2. Automatic glue dispenser dispensing pressure setting

自动上胶机点胶压力的设定是非常重要的。如果打胶机的压力过高，胶水就会溢出。如果压力过低，就会出现泄漏或断续点胶。因此无法达到产品所要求的点胶工艺，导致产品合格率低，工作效率低!

It is very important to set the dispensing pressure of automatic glue dispenser. If the pressure of the glue applicator is too high, the glue will overflow. If the pressure is too low, leakage or intermittent dispensing will occur. Therefore, the dispensing process required by the product cannot be reached, resulting in low product qualification rate and low work efficiency!

3、打胶机点胶针的选择

3. Selection of dispensing needle for glue applicator

打胶机的针的选择应根据产品的大小和胶点的直径来确定。一般来说，打胶机点胶针的大小应该是胶点大小的一半。打胶机的针太大会造成胶水溢出，影响点胶精度!

The needle selection of the glue applicator shall be determined according to the size of the product and the diameter of the glue point. Generally speaking, the size of the dispensing needle of the glue applicator should be half of the size of the glue point. The needle of the glue applicator is too large to cause glue overflow and affect the dispensing accuracy!

4、自动上胶机针与工作面间隔设定

4. Interval setting between needle and working face of automatic gluing machine

不同的打胶机所使用的点胶针也不同。有些针头有一定程度的停止，而有些针头没有。因此，掌握针与工作面之间的点胶间隔十分重要。点胶前，针与工作面之间的间隔应进行校准。

Different dispensing machines use different dispensing needles. Some needles stop to some extent, while others do not. Therefore, it is very important to master the dispensing interval between the needle and the working face. Before dispensing, the interval between the needle and the working surface shall be calibrated.

5、打胶机胶水粘度的选择

5. The choice of glue viscosity of glue applicator

打胶机的胶水粘度大，胶点小，容易导致拉丝。打胶机黏度小，胶点大，可能导致透胶现象。因此，选择合适的胶水粘度的打胶机是非常重要的！

The glue viscosity of the gluing machine is large and the glue point is small, which is easy to lead to wire drawing. The glue applicator has small viscosity and large glue spots, which may cause glue penetration. Therefore, it is very important to choose the glue machine with the proper glue viscosity!

如何才能保证打胶机的点胶精度呢？我们从五个方面来讲了讲这个问题，当然如果您对此有什么疑惑的话，欢迎来我们网站http://www.jntiannuo.com做咨询。

How can we ensure the dispensing accuracy of the gluing machine? We have discussed this issue from five aspects. Of course, if you have any doubts about this, please come to our website http://www.jntiannuo.com Consulting.