In recent years, China's scientific and technological development has made rapid progress, especially in the coastal areas. In order to meet the needs of industrial automatic production, automatic gluing machine equipment is widely used in a wider range of fields, such as semiconductors, electronic components and so on! It happens that these fields have high requirements for the production process of automatic gluing machine, so how can we ensure the dispensing accuracy of automatic gluing machine?

1、自动打胶机用量的设定

1. Setting of dosage of automatic glue applicator

一般来说，自动打胶机的尺寸应该是产品间距的一半，这样可以保证组件有足够的胶水进行粘接，不会有多余的胶水溢出，让自动打胶机的点胶速度更快更准确!

Generally speaking, the size of the automatic gluing machine should be half of the product spacing, so as to ensure that the components have enough glue for bonding, and there will be no excess glue overflow, so that the dispensing speed of the automatic gluing machine is faster and more accurate!

2、自动上胶机点胶压力设定

2. Dispensing pressure setting of automatic gluing machine

自动上胶机点胶压力的设定是非常重要的。如果自动打胶机的压力过高，胶水就会溢出。如果压力过低，就会出现泄漏或断续点胶。因此无法达到产品所要求的点胶工艺，导致产品合格率低，工作效率低!

The setting of dispensing pressure of automatic gluing machine is very important. If the pressure of the automatic glue applicator is too high, the glue will overflow. If the pressure is too low, there will be leakage or intermittent dispensing. Therefore, the dispensing process required by the product cannot be achieved, resulting in low product qualification rate and low work efficiency!

3、自动点胶机点胶针的选择

3. Selection of dispensing needle of automatic dispensing machine

自动打胶机的针的选择应根据产品的大小和胶点的直径来确定。一般来说，自动打胶机点胶针的大小应该是胶点大小的一半。自动打胶机的针太大会造成胶水溢出，影响点胶精度!

The size of the glue point shall be determined according to the diameter of the glue point. Generally speaking, the size of the dispensing needle of the automatic gluing machine should be half the size of the glue point. The needle of automatic glue applicator is too large, which will cause glue overflow and affect the dispensing accuracy!

4、自动上胶机针与工作面间隔设定

4. Interval setting between needle and working face of automatic gluing machine

不同的自动点胶机所使用的点胶针也不同。有些针头有一定程度的停止，而有些针头没有。因此，掌握针与工作面之间的点胶间隔十分重要。点胶前，针与工作面之间的间隔应进行校准。

Different automatic dispensing machines use different dispensing needles. Some needles stop to some extent, while some needles don't. Therefore, it is very important to master the dispensing interval between the needle and the working face. Before dispensing, the interval between the needle and the working face shall be calibrated.

5、自动打胶机胶水粘度的选择

5. Selection of glue viscosity of automatic gluing machine

自动打胶机的胶水粘度大，胶点小，容易导致拉丝。自动打胶机黏度小，胶点大，可能导致透胶现象。因此，选择合适的胶水粘度的自动打胶机是非常重要的!

The glue viscosity of automatic gluing machine is large and the glue point is small, which is easy to lead to wire drawing. Automatic glue applicator has small viscosity and large glue spots, which may lead to glue penetration. Therefore, it is very important to choose an automatic glue applicator with appropriate glue viscosity!

本文的精彩内容由济南双组份打胶机提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.jntiannuo.com我们有专门的客服为您解答问题

The wonderful content of this article is provided by Jinan two-component gluing machine. There are many wonderful contents on this website. You can click to enter more contents: http://www.jntiannuo.com We have special customer service to answer your questions