双组份打胶机的注意事项

1.由于济南双组份打胶机密封胶的固化需要一定时间，因此，已涂了双组份密封胶的玻璃应水平轻轻搬动。
1., due to the need for a certain amount of time to solidify the glue of the two components in Ji'nan, the glass of two components sealant should be gently moved.
2.A组、B组份胶应保持清洁，严防异物进入胶中。
Group 2.A and B components should be kept clean, and foreign matters should be strictly prevented from entering the glue.
3.在连续工作过程中，胶枪每次停止工作时间一般不得超过20分钟，否则，应用A组份胶冲出全部混合胶，直单一的A组份胶从枪口排出为止。
3. in the continuous working process, the glue gun will not stop working more than 20 minutes each time. Otherwise, all the mixed glue is washed out with A component glue until the single A component is discharged from the muzzle.
4.高压胶管不得强行挤压、弯曲，防止影响系统正常工作。

4., high pressure hose should not be forced to bend or bend to prevent the system from functioning normally.
5.混胶器应经常保持畅通，以保证良好的出胶效果。如遇堵塞情况，可用丙酮浸泡后清洗。建议每5组清洗一次。
5., rubber mixer should be kept regular and smooth, so as to ensure good glue production. In case of clogging, acetone can be soaked and cleaned. It is suggested that every 5 groups be cleaned once.
6.济南双组份打胶机当胶枪长时间不用时（超过一周），应拆下枪体使用溶剂将胶枪和混胶器内的残留胶体清洗干净。
6. Ji'nan double component glue machine should be removed when the glue gun is not used for a long time (more than one week), and the gun body should be dismantled to clean the glue gun and the residual colloid in the glue mixer.
7.不同双组份胶生产厂家所生产的胶内含杂质数量不同，根据实际情况清晰B组分的过滤网及单向止回阀，建议每两组清洗一次。
7. the number of impurities in the rubber produced by the different double component rubber manufacturers is different. According to the actual situation, the filter net and the one-way check valve of the B component are clear. It is suggested that every two groups be cleaned once.
8.任何因胶体固化所造成的胶枪、管路或整机的故障，一律不在保修范围之内。
8., any failure of glue gun, pipeline or whole machine caused by gel solidification is not guaranteed.
本文由济南双组份打胶机友情奉献,更多有关的知识请点击:http://www.jntiannuo.com我们将用的技术，真诚的态度,为您提供为的服务。我们将会陆续向大家奉献，敬请期待。
This article by Ji'nan double component glue machine friendship dedication, more related knowledge please click: http://www.jntiannuo.com we will use the most advanced technology, the most sincere attitude, to provide you with the most comprehensive service. We will continue to dedicate to you. Please look forward to it.

上一篇：中空玻璃手工刮胶该怎么操作？
下一篇：双组份打胶机的注意事项