1、 Daily maintenance of Jinan two-component glue applicator:

每班工作完毕后,应将机身擦拭干净；每班工作完毕后排放油水分离器积聚油水；经常检查气路油雾器的润滑油情况，保证气动元件润滑良好；若不连续工作需马上胶枪中残留胶质；工作中密切注意各压力表读数是否正常；每班工作完毕后,应认真填好工作日记。

After each shift, the machine body shall be wiped clean; Drain the accumulated oil and water in the oil-water separator after each shift; Regularly check the lubricating oil condition of the air circuit oil atomizer to ensure good lubrication of the pneumatic components; In case of discontinuous work, the residual glue in the glue gun shall be removed immediately; Pay close attention to whether the readings of each pressure gauge are normal during operation; After each shift is completed, the work diary shall be filled in carefully.

二、济南双组份打胶机的一级维护保养：

2、 First level maintenance of Jinan two-component glue applicator:

、 每周检查机械运动件的连接情况并加润滑脂；、每15个工作日清洗混合器一次。

Check the connection of mechanical moving parts every week and add grease Clean the mixer every 15 working days.

三、济南双组份打胶机的二级维护保养：

3、 Secondary maintenance of Jinan two-component glue applicator:

、每月更换油雾器、阀和主泵、配比泵的润滑油；、每月清洗一次过滤器、针阀，检查一次阀泄压压力；、每年将主泵、配比泵和辅料泵及阀清洗维护一次。

Replace the lubricating oil of the oil atomizer, safety valve, main pump and proportioning pump every month Clean the filter and needle valve once a month and check the relief pressure of the safety valve Clean and maintain the main pump, proportioning pump, auxiliary pump and safety valve once a year.

以上这些内容就是关于济南双组份打胶机http://www.jntiannuo.com的相关内容，如果您想要了解更多内容，欢迎联系在线客服，我们必将竭诚为您服务。

The above contents are about Jinan two-component gluing machine http://www.jntiannuo.com If you want to know more, please contact online customer service, and we will serve you wholeheartedly.