The two-component glue applicator is composed of a and B glue pumps, pneumatic system, lifting arrangement, frame, etc. Details are as follows:

1、胶泵：

1. Rubber pump:

(1)A、B组份各设一个胶泵，在各自的气马达驱动下，分别作往复运动，将胶吸入并压出。A、B胶泵分别与压胶盘固定在一起，再与机架联接组成各自的体系。

(1) Components a and B are respectively equipped with a rubber pump, which is driven by their respective air motors to make reciprocating motion to suck in and press out the rubber. A. B glue pump is respectively fixed with the glue pressing plate, and then connected with the frame to form their own system.

(2)A、B组份的配比是通过比例杠杆进行调度：向里调度，B出胶量减少，向外调度，B出胶量增加。通过调度比例杠杆来操控B胶的出胶量，然后操控A、B胶的配比。

(2) The proportioning of components a and B is scheduled through the proportional lever: when scheduling inward, the glue output of B decreases, and when scheduling outward, the glue output of B increases. Adjust the proportional lever to control the glue output of glue B, and then control the ratio of glue a and B.

(3)出胶量：由气源处理器操控，逆时针调度，出胶量增加，顺时针调度出胶量减小。双组份打胶机的胶泵通过比例杠杆调度A、B胶量配比，具有操作灵活，性能安稳，调度规划大等特点。

(3) Glue output: controlled by the air source processor and scheduled counterclockwise, the glue output increases and decreases when scheduled clockwise. The glue pump of the two-component glue applicator regulates the proportion of a and B glue through the proportional lever, which has the characteristics of flexible operation, stable performance and large scheduling planning.

2、升降安排：

2. Lifting arrangement:

双组份打胶机的A、B组份胶泵分别设一套气动升降安排，该升降安排分别由两个气缸并联组成，并通过横梁固定联接各自的泵体。其目的之一是将两缸的作用力通过压盘作用在胶面上，压力大小由调压阀调度，一般调整在0.3MPa左右;

The A and B component glue pumps of the two-component glue applicator are respectively provided with a set of pneumatic lifting arrangement, which is composed of two cylinders in parallel, and their respective pump bodies are fixedly connected through the beam. One of its purposes is to act the force of the two cylinders on the rubber surface through the pressure plate. The pressure is regulated by the pressure regulating valve and generally adjusted at about 0.3MPa;

双组份打胶机主要技术参数：

Main technical parameters of two-component glue applicator:

类型：GT04

Type: gt04

混合比：6:1-14:1

Mixing ratio: 6:1-14:1

基料桶：55加仑(20L)

Base barrel: 55 gallons (20L)

较大耗气：0.5立方米

Large gas consumption: 0.5 M3

挤胶较大工作压力：20Mpa

Large working pressure for rubber extrusion: 20MPa

供气压力：0.5-0.8Mpa

Air supply pressure: 0.5-0.8mpa

外形尺寸：1100*950*2500mm。

Overall dimension: 1100 * 950 * 2500mm.