The full name of the glass cleaning machine is actually the horizontal glass cleaning dryer. In the front section, water and brush are used to achieve the purpose of cleaning. In the later section, the sponge roller is used to absorb the water droplets on the glass. In the later step, the air knife connected to the fan is used to dry both sides of the glass. Generally speaking, there is a heating rod at the inlet of the fan to ensure that the incoming air is hot air, It is helpful to blow dry the glass.

那么，玻璃清洗机的风干系统就一面了然了，风机入口的加热棒到风机，再到风刀，将风吹出。

Then, the air drying system of the glass washer is clear. The heating rod at the inlet of the fan goes to the fan and then to the wind knife to blow out the wind.

风干系统中，容易出现故障的就是加热棒了，因为加热棒里面是加热丝，容易烧坏，加热棒如何避免坏掉呢？那就需要在关机的时候，先停电玻璃清洗机的传送，水泵等工作元件，停掉风加热后，风机持续工作十到二十分钟再关闭，这样就能帮助加热棒散热，很好的保护加热棒的加热丝。

In the air drying system, the heating rod is prone to failure, because the heating wire in the heating rod is easy to burn out. How can the heating rod avoid damage? When shutting down, first cut off the transmission of the glass washer, the water pump and other working components. After the air heating is stopped, the fan will continue to work for 10 to 20 minutes and then shut down, so as to help the heating rod dissipate heat and protect the heating wire of the heating rod.

这么说起来，保证玻璃清洗机的风干系统很简单，那就是保护加热棒，是保护加热丝，如何操作呢，就是停止风加热后，风机持续运转10到20分钟再关闭即可。

In this way, it is very simple to ensure the air drying system of the glass washer, that is, to protect the heating rod and the heating wire. How to operate it is to stop the air heating, and then turn off the fan for 10 to 20 minutes.