At present, in electronics, led optoelectronics, hardware, plastics and other industries, double liquid glue filling machine is used by more and more customers! If it is an automatic cleaning glue filling machine, the operation is quite simple. Just press the cleaning button on the operation panel, and the machine will finish cleaning automatically.

很多客户询问初次使用后灌胶机的清洗情况。我不知道怎么清洗。让我们在这里做一个简单的解释。

Many customers asked about the cleaning of the glue filling machine after initial use. I don't know how to clean it. Let's make a simple explanation here.

如果机器没有自动清洗功能，该如何清洗呢?

If the machine does not have automatic cleaning function, how to clean it?

，看看胶水的性质。如果胶水是单液，在室温下不易凝固，那么下次使用的胶水在每一点或产品填充后都是一样的，就不能考虑清洗问题了。如为厌氧胶、快干胶、401502胶或硅胶胶等常温下会快速凝固的胶，应清洗干净。清洗时，先将未使用的胶水沥干，再将天南水、工业酒精等有机溶剂放入机器内。然后把这些有机溶剂压在一起，用气枪把它们吹开。

First, look at the properties of glue. If the glue is a single liquid and is not easy to solidify at room temperature, the glue used next time is the same at every point or after the product is filled, so the cleaning problem can not be considered. If it is anaerobic glue, quick drying glue, 401502 glue or silica gel glue that will solidify rapidly at room temperature, it shall be cleaned. When cleaning, drain the unused glue first, and then put organic solvents such as Tiannan water and industrial alcohol into the machine. Then press these organic solvents together and blow them away with an air gun.

对于这种机器，清洗是非常必要的。否则胶水在胶阀或料筒内固化会很麻烦，有些配件可能需要更换。所以每次用的时候，一定要记得清洗!双液灌胶机的a、B胶的混合部分在出胶口只有混合管，所以清洗部分只有混合管，其他部分不需要清洗;

Cleaning is very necessary for this kind of machine. Otherwise, it will be troublesome for the glue to solidify in the glue valve or barrel, and some accessories may need to be replaced. So every time you use it, you must remember to clean it! The mixing part of a and B glue of double liquid glue filling machine only has mixing pipe at the glue outlet, so the cleaning part only has mixing pipe, and other parts do not need to be cleaned;

如果是双组份胶双液灌胶机，清洗比较简单。工作完成后，将灌胶机前的白色搅拌管拆下，浸泡在有机溶剂中，或更换搅拌管。

If it is a two-component glue and two-liquid glue filling machine, the cleaning is relatively simple. After the work is completed, remove the white mixing pipe in front of the glue filling machine, soak it in organic solvent, or replace the mixing pipe.