Any machine will wear and tear after using for a period of time, including people who need annual physical examination. In the process of using the machine, we use it carefully and regularly to repair it, which can prolong the service life of the machine

强制维修法这种的方法是针对于机器设备的維修日期、类别和内容预先制定具体计划，并严格按计划进行，而不管机器设备实际技术状况如何。

The compulsory maintenance method is to make a specific plan in advance according to the maintenance date, category and content of machinery and equipment, and carry out it strictly according to the plan, regardless of the actual technical condition of machinery and equipment.

优点是便于在維修前作好充分准备，并且能够较有用地保证中空玻璃加工设备正常运转。该的方法适用于一定严格保证安 全运转的特别重要、复杂的机器设备，如玻璃清洗机、双组份打胶机及自动中空玻璃加工流水线上的机器设备等。

The utility model has the advantages of convenient preparation before maintenance, and can effectively ensure the normal operation of insulating glass processing equipment. This method is suitable for the very important and complex machinery and equipment which must strictly ensure the safe operation, such as glass cleaning machine, two-component glue machine and machinery and equipment on the automatic insulating glass processing line.

1、定期维修法

1. Periodic maintenance method

是据机器设备实际使用情况，参考有关维护保养周期，制定机器设备維修工作的计划日期和大致的維修工作量。这种的方法有利于做好維修前准备工作。

According to the actual use of machinery and equipment, refer to the relevant maintenance cycle, formulate the planned date and approximate maintenance workload of machinery and equipment maintenance work. This method is conducive to the preparation before maintenance.

2、检查后维修法

2. Maintenance after inspection

这种的方法事先规定机器设备的检查计划，根据检查结果和以前的維修资料，确定維修日期和内容。这种的方法简便易行，但掌握不好就会影响維修前的准备工作。

This method specifies the inspection plan of the machine and equipment in advance, and determines the maintenance date and content according to the inspection results and previous maintenance data. This method is simple and easy to operate, but if you don't master it well, it will affect the preparation before maintenance.

3、部分检测法

3. Partial detection method

其特性是中空玻璃设备各零部件不在同一时间段检测，而是按设备独立部分，按顺序分别进行检测．每次只检测其中部分。这种方法的优点是，由于检测工作量分散，化整为零，因而可利用节假日或非生产时间进行检测，可增加设备的生产时间，提高设备的利用率。

Its characteristic is that all parts of insulating glass equipment are not detected at the same time, but are detected separately according to the independent parts of the equipment and in sequence. Only one part of the equipment is detected each time. The advantage of this method is that due to the scattered detection workload, it can use holidays or non production time for detection, which can increase the production time of equipment and improve the utilization rate of equipment.

4、零部件检测法

4. Parts inspection method

将需检测的中空玻璃设备零部件拆下来，换上事先准备好的同样零部件，也就是用简单“插入”、“拉出”的方法更换零部件。这种方法的优点是可节省拆装时间，其缺点是需一定数量的备件，占用资金多。

Remove the insulating glass equipment parts to be tested and replace them with the same parts prepared in advance, that is, simply "insert" and "pull" the parts. The advantage of this method is that it can save the disassembly time, but the disadvantage is that it needs a certain number of spare parts and takes up a lot of money.

5、同步检测法

5. Synchronous detection method

指生产过程中在工艺上相互之间紧密联系的多台中空玻璃设备，安排在同一时间段内进行检测，实现检测同步化，以减少分散修理所占的停机时间。

It refers to a number of insulating glass equipment closely related to each other in the production process, which are arranged to be tested in the same period of time, so as to realize the detection synchronization, so as to reduce the downtime of decentralized repair.