During the actual use of the insulating glass gluing machine, there will be more or less wear. There is no way to classify such kind of wear. We can summarize them from an overall point of view. For example, there may be a series of wear behaviors, such as the wear of glue and abrasion, and the other is based on the principle of friction, It can be divided into adhesive wear, fatigue wear and corrosion wear.

如果是中空玻璃打胶机出现的粘着磨损，那么这样的一种模式，他们本身就是在整个生产线工作的过程中切削力的作用下所表现出来的，整个摩擦表面的一些不同的吸附膜，会多多少少地遭到不同程度的破坏，让他们表面的轮廓，在相互作用之下会发生一系列的冷焊，因为相对运动，因此，这样的一种模式本身就会让材料从一端走向另一端，而且，它会形成一种磨损，不过在这样一个过程当中，有的时候材料也会附着在原本的表面，在这种情况之下会出现逆转转移的现象，或者是说整个表面会成为一种游离的颗粒，负载的越大，表面的温度也是越高的，而且他们的形象也往往是越严重的.

If it is the adhesive wear of the insulating glass gluing machine, then such a mode itself is shown under the action of cutting force in the whole production line. Some different adsorption films on the whole friction surface will be more or less damaged to different degrees, which will make their surface contour, Under the interaction, a series of cold welding will occur. Because of the relative motion, such a mode itself will make the material move from one end to the other, and it will form a kind of wear. However, in such a process, sometimes the material will adhere to the original surface, and in this case, the reverse transfer phenomenon will appear, In other words, the whole surface will become a kind of free particles. The higher the load is, the higher the surface temperature is, and the more serious their image is

通常来讲，这样的磨损会对运动咬符有一定的影响，整个运动往往是在磨损之间的一种表现形式，而且为了减轻原本的磨损，完全可以采取如下措施，比如，可以合理的去选择一些不同的材料，相对于金属的一些材料来讲，他们更加容易粘着的，而且的材料相对于塑形的材料来说，他就有着超 强的抗粘着的能力，他们都可以用这些不同的材料来进行表 面性的处理，在实际处理的过程当中，也可以通过电动或者是喷涂的方式对他们进行的处理，除此之外，他们也可以对所有的摩擦问题的表面进行一定的温度控制，采用一些不同的润滑剂来进行添加，而且，具有着超 强的控制压力。

Generally speaking, this kind of wear will have a certain impact on the movement bite. The whole movement is often a form of wear. In order to reduce the original wear, the following measures can be taken. For example, some different materials can be reasonably selected. Compared with some metal materials, they are easier to adhere, Moreover, compared with shaping materials, they have super strong anti adhesion ability. They can all use these different materials for surface treatment. In the actual treatment process, they can also be fully treated by electric or spraying. In addition, they can also be fully treated by electric or spraying, They can also control the surface temperature of all friction problems, use some different lubricants to add, and have super control pressure.

如果中空玻璃打胶机表面产生一些疲劳磨损的话，那么在整个应变能力接触的情况之下，往往就会有其他的一些磨损的强度，在摩擦的表面多多少少的都会有一定的深度，而且它有着疲劳的裂纹，随着整个裂纹之间的相互连接，金属微粒往往会从表面开始有所脱落，甚整个表面会出现一些麻点的情况，为了提高表面的疲劳寿命，一定要合理利用。

If there is some fatigue wear on the surface of the insulating glass gluing machine, there will be some other wear strength under the condition of the whole strain capacity contact. There will be some depth on the friction surface, and it has fatigue cracks. With the interconnection of the whole cracks, the metal particles will often fall off from the surface, In order to improve the fatigue life of the surface, it must be used reasonably.