双组份打胶机的结构原理
双组份涂胶机由A、B胶泵、气动系统、升降机构、机架等组成。
The double component coating machine is made up of A, B glue pump, pneumatic system, lifting mechanism, frame and so on.
1、胶泵：
1, glue pump:
（1）A、B组份各设一个胶泵，在各自的气马达驱动下，分别作往复运动，将胶吸入并压出。A、B胶泵分别与压胶盘固定在一起，再与机架连接组成各自的系统。
(1) each of the A and B components is set up with a rubber pump, which is driven by the respective gas motors, and the reciprocating motion is carried out respectively, and the glue is inhaled and pressed out. The A and B glue pumps are fixed together with the press disc respectively, and then they are connected with the frame to form their respective systems.
（2）A、B组份的配比是通过比例杠杆进行调节：向里调节，B出胶量减少，向外调节，B出胶量增加。通过调节比例杠杆来控制B胶的出胶量，从而控制A、B胶的配比。
(2) the ratio of A and B components is regulated by the proportion lever: to adjust to it, the amount of B out of glue is reduced, and the amount of B is increased. By adjusting the ratio lever to control the amount of glue out of B glue, the ratio of A and B glue is controlled.
（3）出胶量：由气源处理器控制，逆时针调节，出胶量增加，顺时针调节出胶量减小。
(3) glue quantity: controlled by gas source processor, counter clockwise adjustment, increase the amount of glue, reduce the amount of glue clockwise.
济南双组份打胶机胶泵通过比例杠杆调节A、B胶量配比，具有操作灵活，性能稳定，调节范围大等特点。
The double component glue pump of Ji'nan is used to adjust the ratio of A and B by proportion lever. It has the characteristics of flexible operation, stable performance and large adjustment range.
A、B组份胶泵分别设一套气动升降机构，该升降机构分别由两个气缸并联组成，并通过横梁固定连接各自的泵体。其目的之一是将两缸的作用力通过压盘作用在胶面上，压力大小由调压阀调节，一般调整在0.3MPa左右；其二，当需要更换胶桶时，气缸可将压盘提起。离开胶桶，以便更换新的胶桶。
The A, B component glue pump set up a set of pneumatic lifting mechanism respectively. The lifting mechanism is composed of two cylinders in parallel, and the pump body is fixed to each other through a beam. One of its purposes is to apply the acting force of the two cylinder to the glue surface through the pressure plate. The pressure is regulated by the pressure regulating valve, generally adjusting to about 0.3MPa. Secondly, when the rubber bucket is needed, the cylinder can lift the pressure plate. Leave the glue barrel so as to replace the new rubber buckets.
本文由济南双组份打胶机友情奉献,更多有关的知识请点击:http://www.jntiannuo.com/
我们将用的技术，真诚的态度,为您提供为的服务。我们将会陆续向大家奉献，敬请期待。
This article is from Ji'nan's two component glue making machine, giving more knowledge. Please click: http://www.jntiannuo.com, we will provide you with the most advanced technology and the most sincere attitude to provide you with the most comprehensive service. We will continue to contribute to you and look forward to it.
上一篇：告诉您灌胶机主要运用在哪些方面?
下一篇：发泡胶混胶机的特点优点
