How to replace the rubber tube of the glue filling machine? Next, I will give you a brief introduction.

　　更换粘合剂填充机的软管是一个非常普遍的问题。每次更换粘合剂时都必须更换橡胶软管。更换粘合剂填充机的橡胶软管可确保两部分式粘合剂填充机的正常运行，并更换粘合剂填充机的软管。在交换过程中我需要注意什么?

　　It is a very common problem to change the hose of the adhesive filling machine. The rubber hose must be replaced every time the adhesive is replaced. Replacing the rubber hose of the adhesive filler ensures the proper operation of the two-part adhesive filler and the replacement of the hose of the adhesive filler. What should I pay attention to in the exchange process?

　　，灌胶机更换胶管的步：

　　First, the first step of replacing the rubber hose of the rubber filling machine:

　　关闭自动分配器并打开软管，从软管上卸下冷却套，卸下空气头，然后卸下软管。确保90°弯头配件也连接到分配阀上。卸下软管后，分配阀将适配器底部的小腔锁定。用旧软管中的凝胶填充空腔，并检查锁定适配器中是否有气泡。如果有气泡，请用新软管填充腔体，检查新软管是否有新气泡，如果有气泡，请使用另一根软管。

　　Close the automatic distributor and open the hose, remove the cooling sleeve from the hose, remove the air head, and then remove the hose. Make sure that the 90 ° elbow fitting is also connected to the distribution valve. When the hose is removed, the distribution valve locks the small chamber at the bottom of the adapter. Fill the cavity with the gel in the old hose and check whether there is any bubble in the lock adapter. If there are bubbles, fill the cavity with a new hose, check whether there are new bubbles in the new hose, if there are bubbles, use another hose.

　　如果我们的灌胶机设备使用年限比较长的话，我们就需要彻底清洁灌胶机的干燥点胶阀或点胶泵，然后再按照上面的灌胶机胶管更换步骤就行更换!

　　If our equipment has a long service life, we need to thoroughly clean the dry dispensing valve or pump of the dispenser, and then follow the above steps to replace the rubber hose of the dispenser!

　　以上内容由灌胶机小编整理，本文观点不代表本站观点。

　　The above content is compiled by the glue filling machine. This point of view does not represent this station's point of view.