In the management of automatic locking screw machine, we should pay attention to safety problems all the time, so what problems should we pay attention to in general?

　　1.用电

　　1. Safe use of electricity

　　自动锁螺丝机用电必须在承载电压范围内，否则容易造成元器件的损坏等严重影响。

　　The power consumption of the automatic screw locking machine must be within the safe range of the bearing voltage, otherwise it is easy to cause the damage of components and other serious effects.

　　2.设备接地

　　2. Equipment safety grounding

　　自动锁螺丝机必须保证接地良好，确保人员操作的静电在电压范围内，操作人员在接触自动锁螺丝机时，为保证操作人员的操作，需要将自动锁螺丝机接到工厂接地端。

　　The automatic locking screw machine must be well grounded to ensure that the safety static electricity of personnel operation is within the voltage range. When the operator contacts the automatic locking screw machine, in order to ensure the safety operation of the operator, it is necessary to connect the automatic locking screw machine to the factory grounding terminal.

　　3.设备使用环境

　　3. Equipment use environment

　　自动锁螺丝机设备需要在相对湿度和温度范围内使用，切勿在潮湿或或高温的环境中使用，并且注意清洗或维护时不能用水清洗等。

　　The automatic locking screw machine equipment needs to be used within the range of relative humidity and temperature. Do not use it in humid or high temperature environment, and pay attention not to use water for cleaning or maintenance.

　　4.操作

　　4. Safe operation

　　人员的操作，如人员放置产品是务必在区域内，且头或手勿深入自动锁螺丝机运动区域。

　　For the safety operation of personnel, if the product is placed by personnel, it must be in a safe area, and the head or hand shall not go deep into the moving area of the automatic locking screw machine.

　　故障等异常时立即按下急停键

　　Press the emergency stop key immediately in case of fault and other abnormalities

　　清理设备旁边的无关器件和物品，保持平台清洁，防止运动轴撞到导致严重故障。

　　Clean the irrelevant devices and articles beside the equipment, keep the platform clean, and prevent the moving shaft from colliding and causing serious fault.