Since summer, various projects have been started one after another, and orders for hollow glass are also increasing. Some enterprises have begun to plan to expand the scale, increase the production capacity of factories, and purchase some machinery and equipment instead of manual operation. One by one, someone asked me about the two-component glue machine in the background. Today, Xiaobian is here to introduce the requirements of the two-component glue machine on the site environment, so that you can understand.

　　卧式双组分打胶机是一种什么样的设备?它对车间环境有什么要求?很多人对此知之甚少。即使对于人士来说，对双组份胶机的了解，其实也只是停留在它的实际使用上。然而，对橡胶机械的认识，停留在其使用水平上一直十分困难。那么，对卧式橡胶机车间环境的要求是什么?

　　What kind of equipment is a horizontal two-component glue beater? What requirements does it have for the workshop environment? Many people know little about it. Even for professionals, the understanding of the two-component glue machine is only in its actual use. However, it has been very difficult to understand the rubber machinery at its level of use. So, what are the requirements for the environment of the horizontal rubber machine workshop?

　　，让我们谈谈对场地面积的要求，卧式胶机与立式胶机是不同的。立式胶机对厂房面积要求相对较高，保守估计要50的地方。和小尺寸的要求打胶机厂房面积小得多,需要的地方不到十平米只可以存储,主要的是因为可以把任意设备体积小,不需要打胶机腾出空间来存储技术。

　　First of all, let's talk about the requirement of site area. Horizontal rubber machine is different from vertical rubber machine. Vertical rubber machine requires relatively high plant area, conservatively estimated to be 50 square meters. Small size requiring gluing machine workshop area is much smaller, need less than 10 square meters can only be stored, the main reason is that any equipment can be small, do not need gluing machine to make room for storage technology.

　　其次，我们想说的是橡胶机对地面平整度的要求，这也是近参加北京国际玻璃展览会的厂家被问到多的问题。小型卧式上胶机对地面平整度要求不高。我们的工程师在设备的初始开发阶段就考虑了地面的平整度，所以在开发过程中也注重解决这个问题。为解决地面不平对打浆机的影响，在设备中特别增设了专用设备。当然，小编这也要强调，虽然设备对地面平整度要求不高，但也不能布满坑洼。

　　Secondly, what we want to say is the requirement of the rubber machine for the smoothness of the ground, which is also the most frequently asked question by the manufacturers who recently participated in the Beijing International Glass Exhibition. Small horizontal gluing machine has low requirement for ground smoothness. Our engineers considered the leveling of the ground in the initial development stage of the equipment, so they also paid attention to solving this problem in the development process. In order to solve the influence of ground unevenness on beater, special equipment has been added to the equipment. Of course, Xiaobian should also emphasize that although the equipment does not require high ground smoothness, it can not be full of pits and holes.

　　然后我们又说了上胶机对工厂的温度、湿度要求，作为设备对上胶机本身对工厂温度要求不高，一般应安装在干燥、无粉尘、无腐蚀性气体、温度在0 ~ 40度的车间内。这些要求与其他设备的要求没有太大的不同。

　　Then we said the temperature and humidity requirements of the glue machine for the factory. As equipment, the temperature requirements of the glue machine itself are not high. Generally, the glue machine should be installed in a dry, dust-free, non-corrosive gas, temperature in the workshop of 0-40 degrees. These requirements are not very different from those of other equipment.

　　后小编跟大家说一下胶机设备对电源的要求。小型橡胶打浆机的电源与其它小型设备的电源相同。此外，还需要0.6-0.8mpa的压缩空气设备。

　　Finally, Xiaobian tells you about the power requirements of rubber machine equipment. The power supply of small rubber beater is the same as that of other small equipment. In addition, 0.6-0.8 MPa compressed air equipment is required.