你现在的位置:首页>企业动态

中空玻璃打胶机的调试方法!

浏览:0
  将其置于平整、清洁的表面上,接通电源和气源,接通后即可开始工作。
  Place it on a flat, clean surface, connect the power supply and air source, and then start work.
  1. 打开气泵开关、主电源开关和控制台开关。按下控制台手动按钮,在显示屏上找到原点设置,点击辅助原点设置,再点击头部原点设置。
  1. Open the air pump switch, main power switch and console switch. Press the console manual button, find the origin settings on the display screen, click the auxiliary origin settings, and then click the header origin settings.
  2. 设置好后,返回到玻璃厚度设置。是玻璃厚度,然后是铝垫片,然后是玻璃厚度。只要命令位置与当前位置值一致,请注意输送带上没有玻璃的设置。
  2. After setting, return to the glass thickness setting. The first is the glass thickness, then the aluminium gasket, and then the glass thickness. As long as the command position is consistent with the current position value, please note that there is no glass on the conveyor belt.
  3.混合后,按下按钮的桶胶水,按下按钮的工作选择,然后按下按钮的胶水开始,然后按下按钮切断,此时,胶头将胶水,然后按下按钮切断后的白色胶不能见,然后按下链接生产线自动运行,此时,胶水可以自动切断。
  3. After mixing, press the first bucket of glue of the button, press the working selection of the button, then press the glue of the button to start, and then press the button to cut off. At this time, the glue head will not see the glue, then press the button to cut off the white glue, and then press the link production line to run automatically. At this time, the glue can be cut off automatically.
  喷胶机是现代工业中一种新型的自动喷胶设备,可对不同尺寸和形状的产品进行喷胶。喷胶机的主要性能有以下要求:喷胶形状可调、喷胶尺寸可调、背吸胶量可调、喷胶粘度不同、喷胶室清洗方便。主要用于皮具、手袋、箱包、玩具、包装等行业。
济南双组份打胶机
  Gum spraying machine is a new type of automatic gum spraying equipment in modern industry. It can spray gum on products of different sizes and shapes. The main performance of spraying machine has the following requirements: adjustable spraying shape, adjustable spraying size, adjustable backing absorption, different spraying viscosity, easy cleaning of spraying chamber. Mainly used in leather goods, handbags, bags, toys, packaging and other industries.
  自动喷枪按送料方式可分为压力式虹吸式和重力式三种。压力喷枪通过压力罐或双间隙泵将压力涂层涂到喷枪上。喷枪本身无罐,减轻了喷枪的重量,降低了操作的劳动强度,特别适用于连续外观不连续的操作,防止因进料引起的工作停顿,提高工作效率,以达到非常好的喷枪质量。能够从任何位置和角度操作枪。
  The automatic spray gun can be divided into pressure siphon type and gravity type according to feeding mode. The pressure spray gun coats the pressure coating on the spray gun through a pressure tank or a double gap pump. The spray gun itself has no tank, which reduces the weight of the spray gun and the labor intensity of the operation. It is especially suitable for the continuous operation with discontinuous appearance, prevents the work stop caused by feeding, and improves the work efficiency, so as to achieve a very good quality of the spray gun. Can operate gun from any position and angle.
  的下部虹吸喷枪油漆罐,压缩空气在前面一半的枪生产低压真空,大气压力枪将从油漆罐油漆,涂料可分为600毫升和1000毫升两种,根据喷涂量的大小。这种枪使用压缩空气,不需要其他设备。但一般操作水平,喷枪的倾斜度是有限的。虹吸式适用于各种涂料。
  The lower siphon spray gun paint tank, compressed air in the front half of the gun to produce low-pressure vacuum, atmospheric pressure gun from the paint tank, paint can be divided into 600 ml and 1000 ml, according to the size of the spray. The gun uses compressed air and does not require other equipment. However, the inclination of the spray gun is limited at the general operating level. Siphon type is suitable for all kinds of coatings.

上一篇:双组份打胶机是否可以打三层中空玻璃!
下一篇:中空玻璃打胶机耗电量怎么样?

  • 微信